The adhesive is in a practical spray bottle based on thermoplastic copolymers for FDM printing technology.
Use it for both heated build plate and unheated printing.
Applications
The product can be used with different materials. Pay special attention when removing the 3D printed parts. We recommend letting the surface cool.
Instructions
Shake well before use.
Highly flammable - keep out of direct sunlight.
Store in a cool place.
Contents: 100 ml
Use it for both heated build plate and unheated printing.
Applications
The product can be used with different materials. Pay special attention when removing the 3D printed parts. We recommend letting the surface cool.
Instructions
Shake well before use.
Highly flammable - keep out of direct sunlight.
Store in a cool place.
Contents: 100 ml
For a more stable first layer
3DLAC Plus is a practical helper when the first layer does not stick evenly or the part starts to peel off during printing. Allow the plate to cool before removing the finished part.
- Compare others too adhesives for 3D printing.
- For FDM machines take a look FDM 3D printers.
- Adhesion also depends on the material, so check the appropriate ones 3D printer filaments.