SUNLU Fila Dryer S2 dry box for dry and stable filament
SUNLU Fila Dryer S2 is a filament dryer that helps with moisture problems: cracking, stringing, rough surface and unstable feed.
The 35-70°C temperature range, 360° heating and touch control make it practical for PLA, PETG, TPU, ABS and other FDM materials when the spool needs to be prepared before printing or to remain protected during operation.
Quick links: filament dryers | PETG | TPU | filaments
Specifications
- Product size: 265 x 274 x 118 mm
- Max. reel size: Ø 210 x 85 mm
- Filament diameter: 1.75 mm; 2.85 mm; 3.00 mm
- Net weight: 1190 g (incl. power supply)
- Relative humidity: ≤ 90%
- Temperature range: 35°C – 70°C
- Input power: AC 100V – 240V ; 50/60Hz
- Output power: DC: 24V ± 1.2; 2A
- Standby power: 0.05W
- Maximum working power: 48W
- Maximum operating current: 1.9A
- LED Screen Size: 3.43 x 2.87 inches
FilaDryer S2, is a box that is specially made for drying and storing your filaments, protecting and protecting them from moisture!
360° surround heating
The heating rate of FilaDryer is twice as fast as most drying boxes on the market and evenly dries your filaments with 360° drying.
Heating temperature up to 70 °C
At a heating temperature of up to 70 °C, it is also possible to optimally dry more special filaments such as ABS, TPU, PA or PC.
Curved design and top to bottom drying
The curved design not only looks great, but also gives the unit more stability, reducing heat transfer from the drying box to the ground.
The top and bottom heating plate design increases the heating efficiency by about 30%.
LED touch screen
The LED touchscreen allows you to view temperature, time, material and LED settings simultaneously so you always have an overview.
Intelligent drying modes for different materials
Smart presets for multiple filament types and drying modes make it easy to use and require no manual adjustments.
You can also switch between displaying °C and °F.