Fiberon™ PPS-CF10 is reinforced with carbon fiber filament made from PPS (polyphenylene sulfide), with minimal distortion under mechanical strength, high heat resistance, chemical resistance for printing, and no need for a heated chamber. With exceptional fire resistance V0 and insensitivity to moisture, the filament is specially designed for professionals working in extreme conditions.
Printing, drying, and curing settings:
Printing temperature: 310˚C - 350˚C
Temperature on the work surface: 80˚C - 90˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)Hardening settings: 125˚ for 16 hours
Printing, drying, and curing settings:
Printing temperature: 310˚C - 350˚C
Temperature on the work surface: 80˚C - 90˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)Hardening settings: 125˚ for 16 hours