Polymaker Fiberon™ PET-CF17 / black/
High-performance material
Fiberon™ PET-CF17 is reinforced with carbon fiber filament made from PET (polyethylene terephthalate). It is the preferred choice for engineering composite materials for 3D printing, characterized by high modulus, heat resistance, moisture sensitivity, and ease of printing.
Fiberon™ PET-CF17 is reinforced with carbon fiber filament made from PET (polyethylene terephthalate). It is the preferred choice for engineering composite materials for 3D printing, characterized by high modulus, heat resistance, moisture sensitivity, and ease of printing.
DESCRIPTION
Printing, drying, and hardening settings:
Printing temperature: 270˚C - 300˚C
Temperature on the work surface: 70˚C - 80˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hours
PolyDryer: Level 3 for 18h. ( PolyDryer™ )
(Only if the material has absorbed moisture)
Hardening settings: 120 ˚ for 10h
Printing temperature: 270˚C - 300˚C
Temperature on the work surface: 70˚C - 80˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hours
PolyDryer: Level 3 for 18h. ( PolyDryer™ )
(Only if the material has absorbed moisture)
Hardening settings: 120 ˚ for 10h
Polymaker Fiberon™ PET-CF17 / black/
45.00 лв