Polymaker Fiberon™ PA6-GF25 /gray/
Coming soon!
High-performance material
Fiberon™ PA6-GF25 is reinforced with glass fiber filament PA6 (nylon 6). The material has excellent thermal and mechanical properties without sacrificing the adhesion of the layer.
High-performance material
Fiberon™ PA6-GF25 is reinforced with glass fiber filament PA6 (nylon 6). The material has excellent thermal and mechanical properties without sacrificing the adhesion of the layer.
DESCRIPTION
Printing, drying, and curing settings?
Printing temperature: 280˚C - 300˚CBuild plate temperature: 40˚C - 50˚CChamber temperature: Room temperaturePrinting speed: up to 300 mm/sCooling fan: OFF
Direct Drive:
Retraction Distance: 3mmRetraction Speed: 40mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours
Printing temperature: 280˚C - 300˚CBuild plate temperature: 40˚C - 50˚CChamber temperature: Room temperaturePrinting speed: up to 300 mm/sCooling fan: OFF
Direct Drive:
Retraction Distance: 3mmRetraction Speed: 40mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours