Polymaker Fiberon™ PA6-CF20 / black/
High-performance material
Fiberon™ PA6-CF20 is reinforced with carbon fiber filament PA6 (nylon 6). The carbon fiber reinforcement provides significantly improved stiffness, strength, and heat resistance with exceptional layer adhesion.
Fiberon™ PA6-CF20 is reinforced with carbon fiber filament PA6 (nylon 6). The carbon fiber reinforcement provides significantly improved stiffness, strength, and heat resistance with exceptional layer adhesion.
DESCRIPTION
Fiberon™ PA6-CF20 has the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 can print in a slightly darker color with a black hue than its predecessor.
Printing, drying, and hardening settings?
Printing temperature: 280˚C - 300˚C
Temperature on the work surface: 40˚C - 50˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mmRetraction Speed: 40mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hours
PolyDryer: Level 3 for 18 hours (PolyDryer™)
(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours
Printing, drying, and hardening settings?
Printing temperature: 280˚C - 300˚C
Temperature on the work surface: 40˚C - 50˚C
Temperature in the chamber: Room temperature
Print speed: up to 300 mm/s
Cooling fan: OFF
Direct Drive:
Retraction Distance: 3mmRetraction Speed: 40mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hours
PolyDryer: Level 3 for 18 hours (PolyDryer™)
(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours
Polymaker Fiberon™ PA6-CF20 / black/
85.00 лв