Polymaker Fiberon™ PA12-CF10 / black/
High-performance material
Fiberon™ PA12-CF10 is a long-fiber reinforced carbon fiber filament. Due to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6 based materials and better mechanical properties than PA12 based materials. Additionally, the carbon fiber reinforcement and Warp-free technology enhance the dimensional stability of parts produced with this material.
Fiberon™ PA12-CF10 is a long-fiber reinforced carbon fiber filament. Due to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6 based materials and better mechanical properties than PA12 based materials. Additionally, the carbon fiber reinforcement and Warp-free technology enhance the dimensional stability of parts produced with this material.
DESCRIPTION
Fiberon™ PA12-CF10 has the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print with a slightly darker shade of black than its predecessor.
Recommended conditions for printing, drying, and hardening
Printing temperature: 280˚C - 300˚CBuild plate temperature: 40˚C - 50˚CChamber temperature: Room temperaturePrinting speed: up to 300 mm/sCooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours
Recommended conditions for printing, drying, and hardening
Printing temperature: 280˚C - 300˚CBuild plate temperature: 40˚C - 50˚CChamber temperature: Room temperaturePrinting speed: up to 300 mm/sCooling fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Recommended drying settings:
Standard drying: 100˚C for 10 hoursPolyDryer: Level 3 for 18 hours (PolyDryer™)(Only if the material has absorbed moisture)
Hardening settings: 100˚ for 16 hours
Polymaker Fiberon™ PA12-CF10 / black/
135.00 лв