PolyLite PLA Glow in the Dark

The use of a hardened steel nozzle is recommended due to the abrasive nature of the phosphor pigment. This prevents the wear of standard brass nozzles.

If the filament has been exposed to moisture, it is advisable to dry it at a temperature of about 55°C for 6 hours to ensure the highest quality during printing.

Yes, the filament is compatible with all standard FDM/FFF 3D printers that support a diameter of 1.75 mm, without the need for a heated chamber.

Yes, it is advisable to keep the filament in a dry place, sealed and protected from sunlight, to preserve its optimal qualities.

The material is mainly suitable for decorative, artistic, and visual uses, but it can also be used for light functional parts where high mechanical strength is not required.

Yes, PLA material can be easily worked, sanded, and painted, but you should keep in mind that working it may reduce the brightness of the glowing effect.

Depending on the length of exposure to light, the effect can last from a few minutes to several hours, gradually fading. You can easily "recharge" it by exposing the item to light again.