Fillamentum HIPS Natural

The specified nozzle range is 230–250°C, with a heated build plate at 90–105°C. Use these values as a starting point and validate them with a test for your printer, build surface and geometry.

Fillamentum specifies a diameter tolerance of ±0.05 mm. Before ordering, check the diameter shown for the selected variant and confirm that it matches your 3D printer.

A good first layer and stable temperature around the model are important for HIPS, particularly for larger geometries. Check build plate cleanliness, Z-offset and adhesion. Fillamentum's technical data sheet lists a glue stick or Magigoo as possible adhesion aids.

Yes. Fillamentum specifies HIPS Extrafill as a support material for ABS and ASA, and HIPS can be dissolved using Lemonesol. Check your multi-material system's compatibility before using these materials together.

Not every accessible area needs chemical removal. A practical approach is to remove easily accessible supports carefully by mechanical means and use Lemonesol where geometry restricts access. Always follow the solvent's safety instructions.

The filament itself does not require dedicated software. STL, 3MF, OBJ and other formats are handled by your CAD software and slicer. Set the appropriate material parameters in the slicer.

Your 3D printer must support the selected filament diameter, a nozzle temperature of 230–250°C and a build plate temperature of 90–105°C. Using HIPS alongside ABS or ASA as a support material requires a suitable multi-material configuration.