Fillamentum PLA Extrafill "Witch Please!" is a 3D printing filament from the limited series Fillamentum Drop – periodic "drops" with limited colors that appear briefly and are not continuously supported in the catalog after depletion. The series is aimed at users looking for a distinctive look (effects and shades) without compromising the predictable workflow of PLA. The colors available in the Drop series vary over time; "Witch Please!" is part of these limited editions.
Key advantages
- Diameter 1.75 mm and Tolerance ±0.05 mm
- Net weight 750 g filament (plus spool)
- Declared base settings for 3D printing: 190–210 °C nozzle, 0–55 °C bed, 30–70 mm/s, 100% cooling.
Material and visual result: why settings matter
When the goal is a clean surface and even layers, the settings for temperature and cooling are crucial. The manufacturer publishes a base "non high-speed" profile (190–210 °C for the nozzle and 100% fan) and separate guidelines for high-speed scenarios with different temperature and speed ranges. The practical conclusion is simple: start from the base parameters and adjust according to the geometry (fine details vs. massive walls), bed adhesion, and desired finish.
Performance and workflow: recommended parameters and sequence
The officially published base parameters for "Witch Please!" are:
- Nozzle temperature: 190–210 °C
- Bed temperature: 0–55 °C
- Speed: 30–70 mm/s
- Cooling: 100%
For printers used in high-speed modes, the product page shows separate settings for "Glossy finish" and "Matte finish" with different temperature and speed ranges. If you are working in such a mode, treat these values as a starting point and validate with tests (e.g., temperature tower and first layer adhesion test), as the actual result depends on the specific hotend, flow, sensor, and the geometry of the part.
Recommended base workflow:
- Check your profile in the slicer: diameter 1.75 mm and appropriate flow rate.
- Start with base temperatures 190–210 °C and fan 100%.
- Set the first layer (speed/height) according to the bed surface and the coating used.
- Calibrate retraction and temperature for minimal strings and clean edges.
- For visible surfaces, reduce speed in areas with small radii and fine details.
Compatibility and ecosystem
The format is 1.75 mm and is intended for standard FFF/FDM printers working with PLA. The product page states that the spool is "AMS ready" (compatibility with automatic feeding/multi-material systems – according to the manufacturer's terminology). Actual mechanical compatibility depends on the specific AMS system and its size/width limitations; if you are using one, check the physical tolerances of your system before ordering.
Design and practicality: spool format and quantity
"Witch Please!" from Fillamentum Drop is available with 750 g of filament. The product information also includes approximate length data: 255 m (for 1.75 mm / 750 g), as well as the weight of the spool +230 g. This format is convenient for projects where you want a limited color without buying a standard 1 kg spool.
Professional scenarios (4–6)
- Prototypes with a "client" vision: easier presentation of form and finish when color is part of the design argument.
- Short product series: distinctive shade for small batches of accessories/housings without the need for painting.
- Display models and props: visual effect directly from printing, with fewer subsequent surface corrections.
- Branded details: more recognizable elements (stands, labels, small housings) with minimal post-processing.
- Combinations with neutral PLA: use as an accent color for panels, inserts, decorative lines, and covers.
Limitations and best practices
- Bed adhesion: for strong adhesion to certain surfaces (e.g., some PEI coatings), use an appropriate separator/adhesive according to the recommendations in the official Printing Guide and adjust the first layers.
- Moisture and storage: follow the manufacturer's "Drying Recommendations," especially if the spool has been left open or the environment is humid.
- High-speed modes: work with test models and gradually increase speed/temperature instead of jumping directly to maximums.
- Visual finish: for visible details, fix the fan (as recommended) and avoid sudden temperature changes between layers.
Technical specifications
| Parameter | Value |
|---|---|
| Material | PLA (PLA Extrafill) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.05 mm |
| Net amount of filament | 750 g |
| Weight of the spool | +230 g |
| Length | 255 m (for 1.75 mm / 750 g) |
| Nozzle temperature (base) | 190–210 °C |
| Bed Temperature | 0–55 °C |
| Speed (base) | 30–70 mm/s |
| Cooling (fan) | 100 % |