Bambu Lab A1 mini Combo + 4 PLA filaments
"Unleash your potential with the Bambu Lab A1 Mini - the compact 3D printer for exceptional precision. Ideal for hobbyists and professionals, it offers ease of use and innovation in one. Start your projects today with the A1 Mini combo!"
A1 Mini Combo + 4 pieces of PLA filaments
A1 Mini Combo + 4 pieces of PLA filaments
- Full automatic calibration.
- 4-color printing with AMS lite.
- Under 48 dB low noise in quiet mode.
- Fully metal linear rails and bearings.
- Compensation for vibrations and flow.
DESCRIPTION
Multicolor Printing
The entirely new AMS lite is elegant and reliable, making multicolor 3D printing accessible to everyone.
Active debit compensation
A1 mini revolutionizes flow control in 3D printing. It uses a high-frequency sensor for high-resolution currents to measure the pressure in the nozzle. The algorithm actively compensates the flow rate according to the readings to extrude with precision.
Full automatic calibration
A1 mini handles various calibrations on its own. It meticulously calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for EVERY printing task, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled and pre-configured with precision. It takes only about 20 minutes to set up for your first print.
Active engine noise suppression
A1 mini can calibrate parameters to match small individual differences between each drive motor. This compensates for the unwanted roughness of the engine noise.
Bed Slinger, with CoreXY speed and quality (high-speed precision）
Fully metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute stand with quality while adhering to all stand speed regulations without the use of specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remotely control and monitor your printer on Bambu Studio or Bambu Handy. With the built-in camera, you can also record timelapse videos.
Technical specifications :
Printing technology: FDM
Construction volume: 180*180*180 mm³
Hot Zone: Fully Metal
Nozzle: Stainless steel
Maximum temperature at the hot end: 300 °C
Nozzle diameter: 0.4mm / 0.2mm, 0.6mm, 0.8mm /
Building Plate: Bambu Textured PEI Plate
Maximum temperature of the construction slab: 80°C
Maximum printing speed: 500 mm/s
Maximum acceleration: 10000 mm/s²
Support filament: PLA, PETG, TPU, PVA
Surveillance camera: Low frame rate camera (up to 1080P)
Timelapse is supported
Filament run-out sensor: Yes
Power loss recovery: Yes
Sensor when filament is tangled: Yes
Weight: 8.2kg
Weight with AMS lite included: 10.2kg
The entirely new AMS lite is elegant and reliable, making multicolor 3D printing accessible to everyone.
Active debit compensation
A1 mini revolutionizes flow control in 3D printing. It uses a high-frequency sensor for high-resolution currents to measure the pressure in the nozzle. The algorithm actively compensates the flow rate according to the readings to extrude with precision.
Full automatic calibration
A1 mini handles various calibrations on its own. It meticulously calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for EVERY printing task, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled and pre-configured with precision. It takes only about 20 minutes to set up for your first print.
Active engine noise suppression
A1 mini can calibrate parameters to match small individual differences between each drive motor. This compensates for the unwanted roughness of the engine noise.
Bed Slinger, with CoreXY speed and quality (high-speed precision）
Fully metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute stand with quality while adhering to all stand speed regulations without the use of specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remotely control and monitor your printer on Bambu Studio or Bambu Handy. With the built-in camera, you can also record timelapse videos.
Technical specifications :
Printing technology: FDM
Construction volume: 180*180*180 mm³
Hot Zone: Fully Metal
Nozzle: Stainless steel
Maximum temperature at the hot end: 300 °C
Nozzle diameter: 0.4mm / 0.2mm, 0.6mm, 0.8mm /
Building Plate: Bambu Textured PEI Plate
Maximum temperature of the construction slab: 80°C
Maximum printing speed: 500 mm/s
Maximum acceleration: 10000 mm/s²
Support filament: PLA, PETG, TPU, PVA
Surveillance camera: Low frame rate camera (up to 1080P)
Timelapse is supported
Filament run-out sensor: Yes
Power loss recovery: Yes
Sensor when filament is tangled: Yes
Weight: 8.2kg
Weight with AMS lite included: 10.2kg
Bambu Lab A1 mini Combo + 4 PLA filaments
890.00 лв