Bambu Lab A1 / Combo
Discover the Bambu Lab A1 - the leading 3D printer for precise and fast printing. Perfect for designers and engineers, it offers high accuracy and ease of use.
Get yours now and unleash your creative potential!
Get yours now and unleash your creative potential!
- Full automatic calibration
- Multicolor printing
- Active debit compensation
- Quick change nozzle for 1 clip
- Active noise suppression from the engine
- 256*256*256 mm³ printing volume
DESCRIPTION
Multicolor Printing
The entirely new AMS lite is elegant and reliable, making multicolor 3D printing accessible to everyone.
Active debit compensation
A1 revolutionizes flow control in 3D printing. It uses a high-frequency, high-resolution sensor to measure the pressure in the nozzle. The algorithm actively compensates the flow rate according to the readings to extrude with precision.
Full Automatic Calibration
A1 handles various calibrations on its own. It meticulously calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for EVERY 3D printing task, automatically.
Quick Change Nozzle
Completely new design of the quick change hotend, the hotend comes off with just 1 clip.
Active engine noise cancellation
A1 can calibrate parameters to match small individual differences between each drive motor. This compensates for the unwanted roughness of engine noise.
Bed Slinger, with CoreXY speed and quality
Fully metal rails, sturdy frame, nozzle pressure sensor, accelerometers, powerful MCU, and most importantly, an advanced motion control system that utilizes these features to print a 14-minute stand with quality while adhering to all speed regulations of the stand straight out of the box without the use of specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remotely control and monitor your printer on Bambu Studio or Bambu Handy. With the built-in camera, you can also record timelapse videos.
Technical specifications :
Printing technology: FDM
Volume of construction: 256*256*256 mm³
Hot Zone: Fully Metal
Nozzle: Stainless steel
Maximum temperature at the hot end: 300 °C
Nozzle diameter: 0.4mm / 0.2mm, 0.6mm, 0.8mm /
Building Plate: Bambu Textured PEI Plate
Maximum temperature of the construction slab: 100°C
Maximum printing speed: 500 mm/s
Maximum acceleration: 10m/s²
Support filament: PLA, PETG, TPU, PVA
Surveillance camera: Low frame rate camera (up to 1080P)
Timelapse is supported
Filament run-out sensor: Yes
Power loss recovery: Yes
Sensor when filament is tangled: Yes
Weight: 11.7kg
Weight with AMS lite included: 14.3kg
The entirely new AMS lite is elegant and reliable, making multicolor 3D printing accessible to everyone.
Active debit compensation
A1 revolutionizes flow control in 3D printing. It uses a high-frequency, high-resolution sensor to measure the pressure in the nozzle. The algorithm actively compensates the flow rate according to the readings to extrude with precision.
Full Automatic Calibration
A1 handles various calibrations on its own. It meticulously calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for EVERY 3D printing task, automatically.
Quick Change Nozzle
Completely new design of the quick change hotend, the hotend comes off with just 1 clip.
Active engine noise cancellation
A1 can calibrate parameters to match small individual differences between each drive motor. This compensates for the unwanted roughness of engine noise.
Bed Slinger, with CoreXY speed and quality
Fully metal rails, sturdy frame, nozzle pressure sensor, accelerometers, powerful MCU, and most importantly, an advanced motion control system that utilizes these features to print a 14-minute stand with quality while adhering to all speed regulations of the stand straight out of the box without the use of specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remotely control and monitor your printer on Bambu Studio or Bambu Handy. With the built-in camera, you can also record timelapse videos.
Technical specifications :
Printing technology: FDM
Volume of construction: 256*256*256 mm³
Hot Zone: Fully Metal
Nozzle: Stainless steel
Maximum temperature at the hot end: 300 °C
Nozzle diameter: 0.4mm / 0.2mm, 0.6mm, 0.8mm /
Building Plate: Bambu Textured PEI Plate
Maximum temperature of the construction slab: 100°C
Maximum printing speed: 500 mm/s
Maximum acceleration: 10m/s²
Support filament: PLA, PETG, TPU, PVA
Surveillance camera: Low frame rate camera (up to 1080P)
Timelapse is supported
Filament run-out sensor: Yes
Power loss recovery: Yes
Sensor when filament is tangled: Yes
Weight: 11.7kg
Weight with AMS lite included: 14.3kg
Bambu Lab A1 / Combo
750.00 лв