3D printer CREALITY CR-6 MAX
- Modular nozzle
- Advanced leveling of the print bed
- 32-bit motherboard with TMC2209 motor drivers
- Large volume of production 400 x 400 x 400 mm
- Intelligent automatic leveling
- Reliable extruder
- Dual Y and Z axes
DESCRIPTION
The Creality CR-6 Max FDM 3D printer has a large print size of 400 x 400 x 400 mm, allowing you to enjoy the "Do It Yourself" fun, realize your unlimited creativity, and satisfy you with more options.
New features
Specifications of the 3D printer CR-6 MAX FDM
The key difference between the CR-6 Max and SE is, of course, the build volume. The CR-6 Max features a build area of 400 x 400 mm, with a maximum build height of 400 mm.
The Golden Triangle
The Z-axis supports are the support rods that Creality previously referred to as the "Golden Triangle." These metal supports help reduce vibrations when moving the bed back and forth. The appearance of these is welcome and means that you will be able to print higher without worrying about excessive Z-offset when you reach the upper limits of the build volume.
Automatic leveling system
The CR-6 Max 3D printer features the same innovative leveling system as the CR-6 SE, using a force-based sensor. The Max will simply touch the nozzle to the bed at specific points, and the hot end deformation sensor will detect the exact point where the nozzle touches the glass. This system is nice for a number of reasons. First, there is no additional probe on the sensor, which means you don't have to calibrate offsets other than the initial Z height to get your first layer.
The additional features of the 3D printer Creality CR-6 Max will include:
TECHNICAL SPECIFICATIONS
Used nozzle tips - MK8
Used filament diameter - 1.75 mm
Max nozzle temperature - 260 ºC
Open filament system - Yes
Extruder type - Bowden
Print volume - 400 mm x 400 mm x 400 mm
Build plate max Temp - 90 ºC
Build plate material - Glass plate from carborundum
Build attachment - bracket
Build leveling system - pressure sensor
Build chamber during process - open
Extruder Number of - 1
Installation space / Requirements
Overall dimensions: 725 mm x 640 mm x 691 mm
Maximum power consumption: 500 W
Voltage: AC: 100 V - 240 V
DC: 24 V
Equipment
HEPA filter - No
Filament leak sensor - Yes
Power loss is not safe - Yes
Touch screen - Yes
Connection
SD card - Yes
USB port - Yes
WLAN - No
Accuracy
New features
- Modular nozzle
- Advanced leveling of the print bed
- 32-bit motherboard with TMC2209 motor drivers
- Large volume of production 400 x 400 x 400 mm
Specifications of the 3D printer CR-6 MAX FDM
The key difference between the CR-6 Max and SE is, of course, the build volume. The CR-6 Max features a build area of 400 x 400 mm, with a maximum build height of 400 mm.
The Golden Triangle
The Z-axis supports are the support rods that Creality previously referred to as the "Golden Triangle." These metal supports help reduce vibrations when moving the bed back and forth. The appearance of these is welcome and means that you will be able to print higher without worrying about excessive Z-offset when you reach the upper limits of the build volume.
Automatic leveling system
The CR-6 Max 3D printer features the same innovative leveling system as the CR-6 SE, using a force-based sensor. The Max will simply touch the nozzle to the bed at specific points, and the hot end deformation sensor will detect the exact point where the nozzle touches the glass. This system is nice for a number of reasons. First, there is no additional probe on the sensor, which means you don't have to calibrate offsets other than the initial Z height to get your first layer.
The additional features of the 3D printer Creality CR-6 Max will include:
- Modular nozzle: Creality has designed the nozzle with modularity in mind. Users can deactivate the nozzle and replace the heat sink, the Teflon tube, or the nozzle tip with the included spare parts.
- Extruder: The reworked extruder should allow for easier feeding of filament.
- Filament sensor: The CR-6 Max 3D printer is equipped with a photoelectric filament sensor that detects any possible breaks or filament leaks.
- Print recovery function: "Interruptions should not cause problems for the CR-6 Max, as it can fully recover and resume printing when it is archived again."
- 32-bit motherboard: CR-6 SE achieved one of its goals on Kickstarter, which means that both SE and Max will be delivered with a 32-bit motherboard for improved performance.
- Drivers for TMC2209 motors: The second goal, Creality, will be to add TMC2209 motor drivers for more precise and quiet printing.
- Power supply from Mean Well: "Clarified in the latest update from Creality, the CR-6 SE and CR-6 Max will be delivered with high-quality Mean Well power supplies for extended hardware life and your peace of mind."
TECHNICAL SPECIFICATIONS
Used nozzle tips - MK8
Used filament diameter - 1.75 mm
Max nozzle temperature - 260 ºC
Open filament system - Yes
Extruder type - Bowden
Print volume - 400 mm x 400 mm x 400 mm
Build plate max Temp - 90 ºC
Build plate material - Glass plate from carborundum
Build attachment - bracket
Build leveling system - pressure sensor
Build chamber during process - open
Extruder Number of - 1
Installation space / Requirements
Overall dimensions: 725 mm x 640 mm x 691 mm
Maximum power consumption: 500 W
Voltage: AC: 100 V - 240 V
DC: 24 V
Equipment
HEPA filter - No
Filament leak sensor - Yes
Power loss is not safe - Yes
Touch screen - Yes
Connection
SD card - Yes
USB port - Yes
WLAN - No
Accuracy
Layer height - 0.1 - 0.4 mm
Resolution - 0.1 mm
3D printer CREALITY CR-6 MAX
1,600.00 лв