Adhesive for 3D printers and 3D printing

DimaFix 3D printer adhesive - Adhesive Pen

€18,00
In Stock Pre order Out of stock
Gold Member
€17,10 €18,00 -5%

Ongoing Gold member discount (when signed in)

Learn more
Add to Wishlist
3D Glue DimaFix Pen is the perfect glue for 3D printers.
DimaFix provides maximum adhesion between the part and the working surface of the 3D printer, thus avoiding deformation during printing.
  • Dimafix Pen provides different adhesion characteristics to the build plate depending on the temperature of your 3D printer's bed.
  • Dimafix Pen does not contain gas and is eco-friendly.
  • DimaFix is easy to use, applied with one motion.

After use, close and store the pen properly.

apple paygoogle paymastervisausdc

*Cryptocurrency payments via USDC on Base are available.

DimaFix Adhesive Pen for better adhesion in 3D printing

DimaFix is a 3D printer adhesive when the first layer, warping or long prints create a risk of peeling. It is most useful on ABS, PETG, PC and other more demanding materials.

Apply to a clean work surface, allow the coat to dry and follow the temperatures for the specific material. After cooling, the part is separated more easily, and the glue is cleaned with water.

Quick links: 3D printer accessories | ABS | PETG | glue guide

3D printing glue with great features

  • Easy to use
  • Suitable for all types of materials (especially ABS)
  • Almost no distortion
  • Completely water soluble and easy to clean
  • Over 100 applications are possible
  • Works great with polycarbonate on glass

HOW TO USE DIMAFIX ADHESIVE WITH YOUR 3D PRINTER

  1. Shake the pen well before applying to the foundation
  2. Apply a layer of the glue to the build plate at room temperature
  3. Wait for the build plate to dry and heat the build plate
  4. Keep the print bed temperature above 85°C during printing
  5. After printing, wait for the build plate to cool and remove your 3D print/part.
  6. After use, close and store properly


GET DIFFERENT ADHESIONS WITH THE DIMAFIX PEN THAT ALLOWS YOU TO PRINT SIMPLE TO COMPLEX 3D-PRINTED PARTS

Below 60 °C: Low adhesion, objects may detach from the plate.

60 – 75ºC: Medium adhesion, for simple prints

75 – 95ºC: High adhesion, for complex geometries and long prints

Above 95 ° C: Very high adhesion, for complex geometries and for very long prints.

This chart shows different print bed temperatures that can result in different levels of adhesion.