{"title":"Polymaker","description":"\u003ch2\u003eChoosing between Polymaker product families\u003c\/h2\u003e\n\u003cp\u003eFor display models, explore \u003ca href=\"\/en\/products\/panchromatm-matte-pla-formerly-polyterratm-pla\"\u003ePanchroma Matte PLA\u003c\/a\u003e, Basic, Metallic and other finishes. Choose PolyLite PETG, ABS or ASA around part loading and its operating environment. PolyFlex TPU addresses applications that need flexibility.\u003c\/p\u003e\n\u003cp\u003eFor Fiberon, PolyMide and other technical families, check drying, nozzle and temperature requirements for the exact formulation. Reinforced materials and standard PLA do not necessarily share a print profile. Browse \u003ca href=\"\/en\/collections\/pla-filament\"\u003ePLA filament\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/industrialni-filamenti\"\u003eengineering filaments\u003c\/a\u003e to shop by material.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions about Polymaker\u003c\/h2\u003e\n\u003ch3\u003eIs Panchroma Matte the former PolyTerra PLA?\u003c\/h3\u003e\n\u003cp\u003ePanchroma Matte PLA is the name used for the former PolyTerra PLA. Check the exact variant and colour: the wider Panchroma range includes other finishes and formulations.\u003c\/p\u003e\n\u003ch3\u003eDoes Fiberon require a special nozzle?\u003c\/h3\u003e\n\u003cp\u003eUse an abrasion-resistant nozzle for grades containing abrasive carbon or glass fibres. Check the selected product’s technical data sheet because requirements differ across the family.\u003c\/p\u003e\n\u003ch3\u003eHow should I choose between TPU90 and TPU95?\u003c\/h3\u003e\n\u003cp\u003eCompare the softness you need and your filament-feeding system. Lower hardness means a softer material, while extruder support and print settings remain important for the project.\u003c\/p\u003e\n\u003ch3\u003eIs every Polymaker filament suitable for AMS?\u003c\/h3\u003e\n\u003cp\u003eNo. Compatibility depends on material, flexibility, spool design and the specific feeding system. Check the feeder manufacturer’s restrictions before use.\u003c\/p\u003e","products":[{"product_id":"panchroma-starlight-pla","title":"Panchroma™ Starlight PLA (Formerly PolyLite™ Starlight)","description":"\u003cp\u003ePolymaker's Panchroma™ Starlight PLA is an easy to print, high quality PLA filament based on high molecular weight PLA from Natureworks. The material is characterized by high stability and reliability; Thanks to Polymaker's Jam-Free technology, the heat resistance of the filament is also increased.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymaker Jam-Free™ technology\u003c\/strong\u003e\u003cbr\u003ePolymaker Jam-Free™ technology increases the heat resistance of the filament itself (not the printed part) up to 140˚C. Increasing filament heat resistance from 60˚C to 140˚C ensures a clog-free experience.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePanchroma™ Starlight PLA\u003cbr\u003e\u003c\/strong\u003eInspired by the natural colours of the universe, Panchroma™ Starlight PLA changes colour depending on viewing angle and light, creating a mesmerizing effect. Create galactic works of art with dazzling colours and let them dance in harmony with beautiful light reflections.\u003cbr\u003ePerfect for decorative and aesthetic 3D printing applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 190˚C - 230˚C\u003cbr\u003eTemperature of the work plate: 25˚C - 60˚C\u003cbr\u003ePrinting speed: 40mm\/s - 60mm\/s\u003cbr\u003eWeight: 1,000 g\u003cbr\u003eFilament diameter: 1.75 mm\u003cbr\u003eFan: Incl.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Starlight Comet","offer_id":50896238215432,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Jupiter","offer_id":50896238248200,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Mercury","offer_id":50896238280968,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Twilight","offer_id":50896238313736,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Midnight","offer_id":53335680942344,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Pulsar","offer_id":53335680975112,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Neptune","offer_id":54797199278344,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true},{"title":"Starlight Aurora","offer_id":57646238138632,"sku":null,"price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/polite-starlight-colors-new.webp?v=1740731327"},{"product_id":"polyflex-tpu90","title":"PolyFlex™ TPU90","description":"\u003cp\u003ePolyFlex TPU90 filament is a material based on thermoplastic polyurethane (TPU) and offers a high degree of flexibility without affecting printability. Due to its high UV resistance, it is ideal for demanding outdoor applications.\u003cbr\u003eIf you are looking for a flexible filament with a long service life, PolyFlex TPU90 is definitely recommended.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003cbr\u003e\u003c\/strong\u003eManufacturer: Polymaker\u003cbr\u003eDiameter: 1.75mm\u003cbr\u003eProduct Type: TPU90\u003cbr\u003eShore hardness: 90A\u003cbr\u003eWeight: 750 g.\u003cbr\u003ePrint speed: 30mm\/s – 60mm\/s\u003cbr\u003ePrinting temperature: 210˚C – 230˚C\u003cbr\u003eBuild plate temperature: 25˚C – 60˚C\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"White","offer_id":50896251748616,"sku":null,"price":31.5,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896251781384,"sku":null,"price":31.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyFlex_E2_84_A2-TPU90-copy.webp?v=1740731405"},{"product_id":"filament-za-3d-printirane-polyflex-tpu95","title":"PolyFlex™ TPU95","description":"PolyFlex™ is from a family of high-quality flexible materials. It provides the ideal solution for applications where high flexibility and durability are required.\u003cbr\u003ePolyFlex™ TPU95 is a thermoplastic polyurethane (TPU) filament specifically designed to work on most desktop 3D printers. It has a Shore hardness of 95A and can stretch more than 3 times its original length.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications:\u003cbr\u003e\u003c\/strong\u003eManufacturer:      Polymaker\u003cbr\u003eDiameter:                1.75 mm\u003cbr\u003eProduct type:          TPU95\u003cbr\u003eShore hardness: 95A\u003cbr\u003eWeight:                     750 g\u003cbr\u003ePrinting speed: 20mm\/s – 40mm\/s\u003cbr\u003ePrinting temperature: 210˚C – 230˚C\u003cbr\u003eTemperature on the work surface: 25˚C – 60˚C","brand":"Polymaker","offers":[{"title":"White","offer_id":50896254468360,"sku":null,"price":28.0,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":50896254501128,"sku":null,"price":28.0,"currency_code":"EUR","in_stock":false},{"title":"Syn","offer_id":50896254533896,"sku":null,"price":28.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896254566664,"sku":null,"price":28.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyFlex_E2_84_A2-TPU95-copy.webp?v=1740731425"},{"product_id":"polyflex-tpu95-hf-filament-za-3d-printirane","title":"PolyFlex™ TPU95-HF","description":"The Polyflex TPU95-HF filament is a high-flow TPU that is specially designed for high-performance printing. The melt index of TPU95-HF is 9.3 (g \/ 10 minutes at 185 °C) directly within the printing range of PLA and allows for doubling the printing speed compared to other flexible filaments. Unlike other TPU, TPU95-HF does not require high temperature, but has a low viscosity even at low temperatures.\u003cbr\u003e\"While other plastics become brittle and discolored from UV light and environmental conditions, no differences are observed with Polyflex TPU95-HF.\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications:\u003cbr\u003e\u003c\/strong\u003eManufacturer:      Polymaker\u003cbr\u003eDiameter:                1.75 mm\u003cbr\u003eProduct type:          TPU95 HF\u003cbr\u003eWeight:                     1.000 g\u003cbr\u003eShore hardness: 95A\u003cbr\u003ePrint speed: N\/A\u003cbr\u003ePrinting temperature:   200 – 220 °C\u003cbr\u003eTemperature on the work surface: 25˚C – 50˚C","brand":"Polymaker","offers":[{"title":"White","offer_id":50896260628744,"sku":null,"price":38.5,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896260661512,"sku":null,"price":38.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyFlex_E2_84_A2-TPU95-HF-copy.webp?v=1740731441"},{"product_id":"filament-za-3d-printirane-polylite-asa","title":"PolyLite ASA filament 1 kg, 1.75 mm","description":"\u003c!-- seo-batch9-bg-polymaker-2026-05-03:start --\u003e\n\u003csection class=\"seo-product-guide seo-batch9-bg-polymaker-2026-05-03\"\u003e\n\u003ch2\u003ePolyLite ASA for outdoor parts and UV resistance\u003c\/h2\u003e\n\u003cp\u003ePolyLite ASA is a 1.75mm ASA filament for parts that need to withstand outdoor, sun and harsher conditions. It is suitable for enclosures, mounting elements, holders and functional prototypes.\u003c\/p\u003e\n\u003cp\u003eASA is a logical alternative to ABS when UV and weather resistance are important. For stable printing, use good adhesion, cooling control and enclosure when necessary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ASA, 1 kg, 1.75 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e external housings, mounting elements and functional parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettings:\u003c\/strong\u003e nozzle 240-260°C and bed 75-95°C according to the printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eQuick links:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/asa-filamenti\"\u003eASA filaments\u003c\/a\u003e | \u003ca href=\"\/en\/collections\/abs-filament-3d-printirane\"\u003eABS\u003c\/a\u003e | \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/asa-ili-abs-filament-za-3d-printer-kak-da-izberem-material-za-3d-printirane\"\u003eASA or ABS\u003c\/a\u003e | \u003ca href=\"\/en\/collections\/kutii-za-sushene-na-filament\"\u003estorage and drying\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- seo-batch9-bg-polymaker-2026-05-03:end --\u003e\n\u003cstrong\u003ePolyLite™ ASA\u003c\/strong\u003e is an alternative to ABS with improved weather resistance. Its UV resistance and excellent mechanical properties make it the ideal choice for real-world applications. PolyLite™ can meet your daily design and prototyping needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003cbr\u003e\u003c\/strong\u003eManufacturer: Polymaker\u003cstrong\u003e\u003c\/strong\u003eDiameter: 1.75mm\u003cstrong\u003e\u003c\/strong\u003eProduct type: ASA\u003cstrong\u003e\u003c\/strong\u003eMelting point: N\/A\u003cstrong\u003e\u003c\/strong\u003ePrint speed: 30mm\/s – 50mm\/s\u003cstrong\u003e\u003c\/strong\u003ePrinting temperature: 240˚C – 260˚C\u003cbr\u003eBuild plate temperature: 75˚C – 95˚C\u003cbr\u003eWeight: 1000 g.","brand":"Polymaker","offers":[{"title":"White","offer_id":50896261218568,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":50896261251336,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896261284104,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/POLYLITE_E2_84_A2-ASA-copy.webp?v=1740731458"},{"product_id":"filament-za-3d-printirane-polylite-petg","title":"PolyLite™ PETG","description":"\u003cp\u003eThe PolyLite™ series covers the most popular 3D printing materials to meet your everyday design and prototyping needs.\u003cbr\u003e\u003cbr\u003ePolyLite PETG is a widely used, naturally transparent plastic that has quickly become a popular material for 3D printing. PolyLite ™ PETG sits right between the hard and strong PLA and the tough, impact-resistant ABS.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003cbr\u003e\u003c\/strong\u003eManufacturer: Polymaker\u003cstrong\u003e\u003c\/strong\u003eDiameter: 1.75mm \/ 2.85mm\u003cstrong\u003e\u003c\/strong\u003eProduct Type: PETG\u003cstrong\u003e\u003c\/strong\u003ePrint speed: 30mm\/s – 50mm\/s\u003cstrong\u003e\u003c\/strong\u003eWeight: 1000g\u003cstrong\u003e\u003c\/strong\u003ePrinting temperature: 230˚C – 240˚C\u003cbr\u003e\u003cbr\u003eBuild plate temperature: 70˚C – 80˚C\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"White","offer_id":50896263905544,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":50896263938312,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":50896263971080,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Syn","offer_id":50896264003848,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":50896264036616,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896264069384,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":false},{"title":"Orange","offer_id":51893310062856,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":57932070748424,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyLite-PETG-copy.webp?v=1740731475"},{"product_id":"filament-za-3d-printirane-polylite-abs","title":"PolyLite ABS filament 1 kg, 1.75 mm","description":"\u003c!-- seo-batch9-bg-polymaker-2026-05-03:start --\u003e\n\u003csection class=\"seo-product-guide seo-batch9-bg-polymaker-2026-05-03\"\u003e\n\u003ch2\u003ePolyLite ABS for strong functional parts and housings\u003c\/h2\u003e\n\u003cp\u003ePolyLite ABS is a 1.75mm ABS filament for FDM 3D printers when the part needs to be stronger, more temperature resistant and suitable for housings, holders, fixtures and functional prototypes.\u003c\/p\u003e\n\u003cp\u003eThe material is made from ABS resin with a lower volatile content than standard ABS filaments. For reliable printing, use a stable bed, good adhesion and, if possible, an enclosure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS, 1 kg, 1.75 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e housings, mechanical parts, holders and prototypes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettings:\u003c\/strong\u003e nozzle 245-265°C and bed 90-100°C according to printer and profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eQuick links:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/abs-filament-3d-printirane\"\u003eABS filaments\u003c\/a\u003e | \u003ca href=\"\/en\/products\/3d-lepilo-dimafix-3d-printing-adhesive-pen\"\u003eDimaFix glue\u003c\/a\u003e | \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/3d-printirane-abs-filament-nastroiki\"\u003eABS settings\u003c\/a\u003e | \u003ca href=\"\/en\/collections\/asa-filamenti\"\u003eASA alternative\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- seo-batch9-bg-polymaker-2026-05-03:end --\u003e\nPolyLite™ ABS is made with the finest raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday design and prototyping needs.\u003cbr\u003ePolyLite™ ABS is a filament made from a special bulk polymerized ABS resin that has significantly lower volatile matter content than traditional ABS filaments. Provides excellent print quality with minimal odor during printing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003cbr\u003e\u003c\/strong\u003eManufacturer: Polymaker\u003cbr\u003eDiameter: 1.75mm\u003cbr\u003eProduct type: ABS\u003cbr\u003eMelting point: N\/A\u003cbr\u003ePrint speed: 30mm\/s – 50mm\/s\u003cbr\u003eWeight: 1000g\u003cbr\u003ePrinting temperature: 245˚C – 265˚C\u003cbr\u003e\u003cbr\u003eBuild plate temperature: 90˚C – 100˚C","brand":"Polymaker","offers":[{"title":"White","offer_id":50896266756360,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":50896266789128,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":50896266821896,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":50896266854664,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":50896266887432,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Syn","offer_id":50896266920200,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":50896266952968,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896266985736,"sku":null,"price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyLite_E2_84_A2-ABS-copy.webp?v=1740731494"},{"product_id":"filament-za-3d-printirane-polylite-pla-cf","title":"PolyLite PLA-CF","description":"PolyLite™ PLA-CF is PLA reinforced with carbon fibers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCan my printer print PolyLite™ PLA-CF? \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYour printer will need to be equipped with a hardened nozzle to print PolyLite™ PLA-CF.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications :\u003cbr\u003e\u003c\/strong\u003eManufacturer :     Polymaker\u003cbr\u003e\u003cbr\u003eDiameter:                1.75 mm\u003cbr\u003e\u003cbr\u003eProduct type:          PLA-CF\u003cbr\u003e\u003cbr\u003eColor:                             Black\u003cbr\u003e\u003cbr\u003ePrint speed: 30 mm\/s – 70 mm\/s\u003cbr\u003eWeight:                     1000 g\u003cbr\u003e\u003cbr\u003ePrinting temperature:           210˚C – 230˚C\u003cbr\u003e\u003cbr\u003eTemperature on the work surface:       30˚C – 70˚C","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896268787976,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyLite-PLA-CF-copy.webp?v=1740731510"},{"product_id":"filament-za-3d-printirane-polymaker-pc-abs","title":"Polymaker PC-ABS filament 1 kg, 1.75 mm","description":"\u003c!-- seo-batch9-bg-polymaker-2026-05-03:start --\u003e\n\u003csection class=\"seo-product-guide seo-batch9-bg-polymaker-2026-05-03\"\u003e\n\u003ch2\u003ePolymaker PC-ABS for engineering 3D parts with higher strength\u003c\/h2\u003e\n\u003cp\u003ePolymaker PC-ABS combines the advantages of polycarbonate and ABS when you are looking for higher strength, heat resistance and good surface finish in functional and engineering FDM parts.\u003c\/p\u003e\n\u003cp\u003eThis is not starter material. For a stable result, plan for an enclosure, good adhesion, proper drying and a printer that maintains the necessary temperatures.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PC-ABS, 1 kg, 1.75 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e engineering prototypes, housings and higher load parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettings:\u003c\/strong\u003e nozzle 250-270°C and bed 90-105°C according to profile and machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eQuick links:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/industrialni-filamenti\"\u003eindustrial filaments\u003c\/a\u003e | \u003ca href=\"\/en\/collections\/abs-filament-3d-printirane\"\u003eABS\u003c\/a\u003e | \u003ca href=\"\/en\/collections\/kutii-za-sushene-na-filament\"\u003efilament drying\u003c\/a\u003e | \u003ca href=\"\/en\/products\/3d-lepilo-dimafix-3d-printing-adhesive-pen\"\u003eadhesion\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- seo-batch9-bg-polymaker-2026-05-03:end --\u003e\nPolymaker™ PC-ABS is a PC\/ABS polymer blend that offers excellent strength and heat resistance while exhibiting good surface finish and good metal coating compatibility.\u003cbr\u003e\u003cbr\u003eThe industrial range of products provides engineering quality materials to unlock the use of 3D printing across multiple industries for new applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical characteristics:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Polymaker\u003cbr\u003eDiameter: 1.75mm\u003cbr\u003eProduct type: PC-ABS\u003cbr\u003eWeight: 1000g\u003cbr\u003ePrint speed: 30mm\/s – 50mm\/s\u003cbr\u003ePrinting temperature: 250˚C – 270˚C\u003cbr\u003eBuild plate temperature: 90˚C – 105˚C","brand":"Polymaker","offers":[{"title":"White","offer_id":50896274129160,"sku":null,"price":32.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":50896274161928,"sku":null,"price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker_E2_84_A2-PC-ABS-copy.webp?v=1740731526"},{"product_id":"filament-za-3d-printirane-polymax-pc","title":"PolyMax™ PC (formerly PC-Max™)","description":"\u003cp\u003ePolyMax™ is an advanced 3D printing filament, manufactured with Polymaker's nano-reinforcing technology, to provide exceptional mechanical properties and print quality.\u003cbr\u003e\u003cbr\u003ePolyMax™ PC combines excellent strength, durability, heat resistance, and print quality. It is the ideal choice for a wide range of engineering applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eManufacturer:      Polymaker\u003cbr\u003eDiameter:                1.75 mm\u003cbr\u003eProduct type:          PC\u003cbr\u003eColor:                             Black\u003cbr\u003eMelting temperature: N\/A\u003cbr\u003ePrint speed: 30mm\/s – 50mm\/s\u003cbr\u003eWeight:                     750 g\u003cbr\u003ePrinting temperature:      250˚C – 270˚C\u003cbr\u003eTemperature on the work surface: 90˚C – 105˚C\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":50949538840840,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":50949538873608,"sku":null,"price":40.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyMax_E2_84_A2-PC-copy.webp?v=1740731542"},{"product_id":"filament-za-3d-printirane-polymide-copa-nylon","title":"PolyMide™ CoPA Nylon","description":"PolyMide™ is from the family of nylon\/polyamide-based filaments. Manufactured with Polymaker's Warp-Free™ technology, PolyMide™ filaments provide engineering properties inherent to nylon and ease of printing.\u003cbr\u003e\u003cbr\u003ePolymaker CoPA is a Copolymer Nylon filament for 3D printers that has excellent characteristics. The filament is heat resistant and you can use it to make technical parts.\u003cbr\u003e\"It is excellent for processing. CoPA Nylon is temperature resistant up to over 175°C. Polymaker Nylon has the properties of Nylon 6\/6 resistance, while maintaining high tensile strength, toughness, and resistance of Nylon 6.\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications:\u003cbr\u003e\u003c\/strong\u003eManufacturer:      Polymaker\u003cbr\u003eDiameter:                1.75 mm\u003cbr\u003eProduct type:          CoPA Nylon\u003cbr\u003eColor:                             Black\u003cbr\u003eMelting temperature: N\/A\u003cbr\u003ePrint speed: N\/A\u003cbr\u003eWeight:                750 g\u003cbr\u003ePrinting temperature:   250˚C – 270˚C\u003cbr\u003eTemperature on the workbench:       25˚C – 50˚C","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896280551688,"sku":null,"price":60.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyMide_E2_84_A2-CoPA-Nylon-copy.webp?v=1740731574"},{"product_id":"filament-za-3d-printirane-polymide-pa6-cf","title":"PolyMide™ PA6-CF","description":"PolyMide™ is from the family of nylon\/polyamide-based filaments. Manufactured with Polymaker's Warp-Free™ technology, PolyMide™ filaments provide engineering properties inherent to nylon and ease of printing.\u003cbr\u003e\u003cbr\u003ePolyMide™ PA6-CF is a PA6 (nylon 6) filament reinforced with carbon fibers. The carbon fiber reinforcement provides significantly improved stiffness, strength, and heat resistance with exceptional layer adhesion.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e* We strongly recommend using a wear-resistant nozzle.\u003cbr\u003e\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003cem\u003e:\u003cbr\u003e\u003c\/em\u003eManufacturer:      Polymaker\u003cbr\u003eDiameter:                     1.75 mm\u003cbr\u003eProduct type:          PA6-CF\u003cbr\u003eColor:                             Black\u003cbr\u003eMelting temperature: 220 (°C)\u003cbr\u003ePrint speed: 30mm\/s – 60mm\/s\u003cbr\u003eWeight: 500g\u003cbr\u003ePrinting temperature:   280˚C – 300˚C\u003cbr\u003eTemperature on the work surface: 25˚C – 50˚C (DO NOT exceed 50˚C)\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896285040904,"sku":null,"price":45.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyMide_E2_84_A2-PA6-CF-copy.webp?v=1740731589"},{"product_id":"polymide-pa12-cf-black-carbon-fiber-nylon","title":"PolyMide™ PA12-CF - Black","description":"PolyMide PA12-CF is a high-quality PA12 (nylon) filament for 3D printing, reinforced with carbon fibers. Due to the low moisture sensitivity of PA12, this product features exceptional mechanical and thermal properties.\u003cbr\u003e\u003cbr\u003e3D printing\u003cbr\u003eWith its innovative fiber adhesion technology, PolyMide PA12-CF significantly improves the strength of the Z-axis, providing a strong bond between the fibers and the matrix. Unlike conventional fiber-reinforced filaments, which show a significant reduction in Z-axis strength, this filament offers higher adhesion of the intermediate layer compared to unreinforced PA12.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3D printing without deformation\u003c\/strong\u003e\u003cbr\u003eThe Warp-Free technology from Polymaker enables the production of nylon filaments with excellent dimensional stability and almost no deformation. This is achieved through fine-tuning of the microstructure and crystallization behavior of the nylon, allowing the material to fully relieve internal stress before solidification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eThe combination of ease of 3D printing and distortion-free technology makes this product ideal for manufacturing production tools and other high-performance applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical specifications:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eProduct view: Carbon fiber, PA - nylon fibers\u003c\/li\u003e\n\u003cli\u003eFilament color: Black\u003c\/li\u003e\n\u003cli\u003eRecommended processing temperature: 260 - 300 °C\u003c\/li\u003e\n\u003cli\u003eRecommended heating temperature: 25 - 50 °C\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 500 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896395141384,"sku":null,"price":80.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/PolyMide-PA12-CF_1.75mm_0.5kg_cheren-3d-filament-carbonwebp.webp?v=1740731922"},{"product_id":"polylite-pla-glow-in-the-dark-green","title":"Polymaker Panchroma™ Glow PLA 1.75 mm – glows in the dark","description":"\u003ch2 data-start=\"366\" data-end=\"418\"\u003eWhat is Polymaker Panchroma™ Glow PLA?\u003c\/h2\u003e\n\u003cp data-start=\"420\" data-end=\"752\"\u003ePolymaker Panchroma Glow PLA is a high-quality 3D printing filament designed for projects that require a bright, impressive glow-in-the-dark effect. Thanks to the special luminophore pigment (aluminum strontium oxide), this filament absorbs light during the day and emits a neon glow at night or in the absence of lighting.\u003c\/p\u003e\n\u003cp data-start=\"754\" data-end=\"923\"\u003eThis makes Panchroma Glow PLA perfect for artistic, decorative and functional applications, including design elements, souvenirs, toys and educational models.\u003c\/p\u003e\n\u003ch2 data-start=\"925\" data-end=\"968\"\u003eMain benefits of Panchroma Glow PLA\u003c\/h2\u003e\n\u003cul data-start=\"970\" data-end=\"1374\"\u003e\n\u003cli data-start=\"970\" data-end=\"1069\"\u003e\n\u003cp data-start=\"972\" data-end=\"1069\"\u003e\u003cstrong data-start=\"972\" data-end=\"999\"\u003eGlow in the dark effect:\u003c\/strong\u003e Provides a clearly visible and long-lasting glow in low-light conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1070\" data-end=\"1195\"\u003e\n\u003cp data-start=\"1072\" data-end=\"1195\"\u003e\u003cstrong data-start=\"1072\" data-end=\"1099\"\u003eEasy to 3D print:\u003c\/strong\u003e Compatible with standard PLA setups, no need for an enclosure or complicated preparation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1196\" data-end=\"1298\"\u003e\n\u003cp data-start=\"1198\" data-end=\"1298\"\u003e\u003cstrong data-start=\"1198\" data-end=\"1218\"\u003ePLA-based material:\u003c\/strong\u003e Uses a familiar PLA printing workflow.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1299\" data-end=\"1374\"\u003e\n\u003cp data-start=\"1301\" data-end=\"1374\"\u003e\u003cstrong data-start=\"1301\" data-end=\"1324\"\u003eExcellent detail:\u003c\/strong\u003e Provides a smooth surface and precise results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1376\" data-end=\"1433\"\u003eTechnical characteristics and recommendations for 3D printing\u003c\/h2\u003e\n\u003cp data-start=\"1435\" data-end=\"1522\"\u003eFor best results when working with Panchroma Glow PLA, we recommend the following settings:\u003c\/p\u003e\n\u003cul data-start=\"1524\" data-end=\"1981\"\u003e\n\u003cli data-start=\"1524\" data-end=\"1571\"\u003e\n\u003cp data-start=\"1526\" data-end=\"1571\"\u003e\u003cstrong data-start=\"1526\" data-end=\"1552\"\u003eFilament diameter:\u003c\/strong\u003e 1.75 mm (±0.03 mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1572\" data-end=\"1633\"\u003e\n\u003cp data-start=\"1574\" data-end=\"1633\"\u003e\u003cstrong data-start=\"1574\" data-end=\"1619\"\u003eRecommended Extruder Temperature:\u003c\/strong\u003e 190°C – 230°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1634\" data-end=\"1692\"\u003e\n\u003cp data-start=\"1636\" data-end=\"1692\"\u003e\u003cstrong data-start=\"1636\" data-end=\"1680\"\u003eHeating platform temperature:\u003c\/strong\u003e 25°C – 60°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1693\" data-end=\"1751\"\u003e\n\u003cp data-start=\"1695\" data-end=\"1751\"\u003e\u003cstrong data-start=\"1695\" data-end=\"1739\"\u003eRecommended 3D Printing Speed:\u003c\/strong\u003e up to 200 mm\/s\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1752\" data-end=\"1784\"\u003e\n\u003cp data-start=\"1754\" data-end=\"1784\"\u003e\u003cstrong data-start=\"1754\" data-end=\"1768\"\u003eCooling:\u003c\/strong\u003e On (100%)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1785\" data-end=\"1916\"\u003e\n\u003cp data-start=\"1787\" data-end=\"1916\"\u003e\u003cstrong data-start=\"1787\" data-end=\"1811\"\u003eRecommended nozzle:\u003c\/strong\u003e Hardened steel 0.4 mm – a must to avoid premature wear.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1917\" data-end=\"1981\"\u003e\n\u003cp data-start=\"1919\" data-end=\"1981\"\u003e\u003cstrong data-start=\"1919\" data-end=\"1933\"\u003eRetraction:\u003c\/strong\u003e 1 mm for Direct Drive, up to 3 mm for Bowden systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1983\" data-end=\"2150\"\u003eThe filament contains an abrasive pigment, necessitating the use of a hardened steel nozzle to maintain print quality and equipment longevity.\u003c\/p\u003e\n\u003ch2 data-start=\"2152\" data-end=\"2204\"\u003eApplications and project ideas with Panchroma Glow PLA\u003c\/h2\u003e\n\u003cp data-start=\"2206\" data-end=\"2274\"\u003ePanchroma Glow PLA filament is suitable for a variety of applications:\u003c\/p\u003e\n\u003cul data-start=\"2276\" data-end=\"2491\"\u003e\n\u003cli data-start=\"2276\" data-end=\"2311\"\u003e\n\u003cp data-start=\"2278\" data-end=\"2311\"\u003eArtistic and decorative objects\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2312\" data-end=\"2350\"\u003e\n\u003cp data-start=\"2314\" data-end=\"2350\"\u003eGlow in the dark toys and figurines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2351\" data-end=\"2389\"\u003e\n\u003cp data-start=\"2353\" data-end=\"2389\"\u003eEducational models for demonstrations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2390\" data-end=\"2435\"\u003e\n\u003cp data-start=\"2392\" data-end=\"2435\"\u003eAdvertising materials and promotional products\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2436\" data-end=\"2491\"\u003e\n\u003cp data-start=\"2438\" data-end=\"2491\"\u003eSafety features and markings visible in the dark\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"2493\" data-end=\"2550\"\u003eStorage and maintenance tips for Panchroma Glow PLA\u003c\/h2\u003e\n\u003cp data-start=\"2552\" data-end=\"2799\"\u003eIt is recommended to store the filament in a dry room, away from moisture and direct sunlight. If necessary, dry the material at 55°C for about 6 hours to avoid printing defects such as bubbles and surface unevenness.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Green","offer_id":50896406905096,"sku":null,"price":23.0,"currency_code":"EUR","in_stock":true},{"title":"Syn","offer_id":50896406937864,"sku":null,"price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/svetesht-v-tamnoto-filament-za-3d-printer-Panchroma_GlowPLA.webp?v=1750763067"},{"product_id":"polymaker-fiberon-pa6-cf20-cheren","title":"Polymaker Fiberon™ PA6-CF20 \/ black\/","description":"Fiberon™ PA6-CF20 has the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 can print in a slightly darker color with a black hue than its predecessor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrinting, drying, and hardening settings?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePrinting temperature: 280˚C - 300˚C\u003cbr\u003eTemperature on the work surface: 40˚C - 50˚C\u003cbr\u003eTemperature in the chamber: Room temperature\u003cbr\u003ePrint speed: up to 300 mm\/s\u003cbr\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 40mm\/s\u003cstrong\u003e\u003c\/strong\u003eIndirect Drive:\u003cstrong\u003e\u003c\/strong\u003eRetraction Distance: 6mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cbr\u003ePolyDryer: Level 3 for 18 hours (PolyDryer™)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eHardening settings: 100˚ for 16 hours\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896436429064,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printer-Polymaker-Fiberon_E2_84_A2-PA6-CF20-2.webp?v=1740732177"},{"product_id":"polymaker-fiberon-pps-cf10-cheren","title":"Polymaker Fiberon™ PPS-CF10 \/black\/","description":"Fiberon™ PPS-CF10 is reinforced with carbon fiber filament made from PPS (polyphenylene sulfide), with minimal distortion under mechanical strength, high heat resistance, chemical resistance for printing, and no need for a heated chamber. With exceptional fire resistance V0 and insensitivity to moisture, the filament is specially designed for professionals working in extreme conditions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrinting, drying, and curing settings:\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 310˚C - 350˚C\u003cbr\u003eTemperature on the work surface: 80˚C - 90˚C\u003cbr\u003eTemperature in the chamber: Room temperature\u003cbr\u003ePrint speed: up to 300 mm\/s\u003cbr\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cstrong\u003e\u003c\/strong\u003ePolyDryer: Level 3 for 18 hours (PolyDryer™)\u003cstrong\u003e\u003c\/strong\u003e(Only if the material has absorbed moisture)Hardening settings: 125˚ for 16 hours\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896439836936,"sku":null,"price":64.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printer-Polymaker-Fiberon_E2_84_A2-PPS-CF10-cheren-2.webp?v=1740732193"},{"product_id":"polymaker-fiberon-petg-rcf08-cheren","title":"Polymaker Fiberon™ PETG-rCF08 \/black\/","description":"\u003cstrong\u003ePrinting, drying, and curing settings?\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 240˚C - 270˚C\u003cstrong\u003e\u003c\/strong\u003eBuild plate temperature: 60˚C - 70˚C\u003cstrong\u003e\u003c\/strong\u003eChamber temperature: Room temperature\u003cstrong\u003e\u003c\/strong\u003ePrinting speed: up to 300 mm\/s\u003cstrong\u003e\u003c\/strong\u003eCooling fan: 0%-50%\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 40mm\/s\u003cstrong\u003e\u003c\/strong\u003eIndirect Drive:\u003cstrong\u003e\u003c\/strong\u003eRetraction Distance: 6mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 65˚C for 3 hours\u003cstrong\u003e\u003c\/strong\u003ePolyDryer: Level 2 for 6 hours (PolyDryer™)\u003cstrong\u003e\u003c\/strong\u003e(Only if the material has absorbed moisture)\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896442065160,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PETG-rCF08-3.webp?v=1740732208"},{"product_id":"polymaker-fiberon-petg-esd-cheren","title":"Polymaker Fiberon™ PETG-ESD \/black\/","description":"\u003cp\u003e\u003cstrong\u003ePrint and drying settings?\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 250˚C - 290˚C\u003cstrong\u003e\u003c\/strong\u003eBuild plate temperature: 70˚C - 80˚C\u003cstrong\u003e\u003c\/strong\u003ePrint speed: up to 500 mm\/s\u003cstrong\u003e\u003c\/strong\u003eFan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 1mm\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 20mm\/s\u003cstrong\u003e\u003c\/strong\u003eIndirect \u003cbr\u003eDrive:\u003cstrong\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying settings: 65˚C for 3 hours\u003cbr\u003ePolyDryer™: Level 3 for 6 hours\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896443638024,"sku":null,"price":44.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PETG-ESD-cheren-3.webp?v=1740732226"},{"product_id":"polymaker-fiberon-pa612-cf15-cheren","title":"Polymaker Fiberon™ PA612-CF15 \/ black\/","description":"Fiberon™ PA612-CF15 has the same great formula as PolyMide PA612-CF, although Fiberon™ PA612-CF15 may print with a slightly darker shade of black than its predecessor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrinting, drying, and \u003c\/strong\u003e\u003cstrong\u003ecuring settings\u003c\/strong\u003e\u003cstrong\u003e?\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 250˚C - 300˚C\u003cbr\u003eTemperature on the work surface: 40˚C - 50˚C\u003cbr\u003eTemperature in the chamber: Room temperature\u003cbr\u003ePrint speed: up to 300 mm\/s\u003cbr\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cbr\u003ePolyDryer: Level 3 for 18 hours (PolyDryer™)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003eHardening settings: 100˚ for 16 hours\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896447701256,"sku":null,"price":32.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PA612-CF15-cheren-3.webp?v=1740732242"},{"product_id":"polymaker-fiberon-pet-cf17-cheren","title":"Polymaker Fiberon™ PET-CF17 0.5 kg – Black","description":"\u003cstrong\u003ePrinting, drying, and hardening settings:\u003c\/strong\u003e\u003cbr\u003ePrinting temperature: 270˚C - 300˚C\u003cbr\u003eTemperature on the work surface: 70˚C - 80˚C\u003cbr\u003eTemperature in the chamber: Room temperature\u003cbr\u003ePrint speed: up to 300 mm\/s\u003cbr\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003c\/strong\u003e\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cbr\u003ePolyDryer: Level 3 for 18h. ( PolyDryer™ )\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003eHardening settings: 120 ˚ for 10h\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896455237896,"sku":null,"price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PET-CF17-cheren-3.webp?v=1740732256"},{"product_id":"polymaker-fiberon-pa12-cf10-cheren","title":"Polymaker Fiberon™ PA12-CF10 – Black – 500 g","description":"Fiberon™ PA12-CF10 has the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print with a slightly darker shade of black than its predecessor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended conditions for printing, drying, and \u003c\/strong\u003e\u003cstrong\u003ehardening\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 280˚C - 300˚C\u003cstrong\u003e\u003c\/strong\u003eBuild plate temperature: 40˚C - 50˚C\u003cstrong\u003e\u003c\/strong\u003eChamber temperature: Room temperature\u003cstrong\u003e\u003c\/strong\u003ePrinting speed: up to 300 mm\/s\u003cstrong\u003e\u003c\/strong\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003c\/strong\u003e\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cstrong\u003e\u003c\/strong\u003ePolyDryer: Level 3 for 18 hours (PolyDryer™)\u003cstrong\u003e\u003c\/strong\u003e(Only if the material has absorbed moisture)\u003cbr\u003eHardening settings: 100˚ for 16 hours\n\u003cp\u003eExplore \u003ca href=\"\/en\/blogs\/3d-printirane-3d-printeri\/filamenti-za-3d-printeri-s-vaglerodni-vlakna-carbon-fiber\"\u003ecarbon-fibre filament and printer selection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896456646920,"sku":null,"price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PA12-CF10-cheren-3-1.webp?v=1740732272"},{"product_id":"polymaker-fiberon-pa6-gf25-siv","title":"Polymaker Fiberon™ PA6-GF25 \/gray\/","description":"\u003cstrong\u003ePrinting, drying, and curing settings?\u003cbr\u003e\u003c\/strong\u003ePrinting temperature: 280˚C - 300˚C\u003cstrong\u003e\u003c\/strong\u003eBuild plate temperature: 40˚C - 50˚C\u003cstrong\u003e\u003c\/strong\u003eChamber temperature: Room temperature\u003cstrong\u003e\u003c\/strong\u003ePrinting speed: up to 300 mm\/s\u003cstrong\u003e\u003c\/strong\u003eCooling fan: OFF\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Drive:\u003cbr\u003e\u003c\/strong\u003eRetraction Distance: 3mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 40mm\/s\u003cstrong\u003e\u003c\/strong\u003eIndirect Drive:\u003cstrong\u003e\u003c\/strong\u003eRetraction Distance: 6mm\u003cstrong\u003e\u003c\/strong\u003eRetraction Speed: 60mm\/\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended drying settings:\u003cbr\u003e\u003c\/strong\u003eStandard drying: 100˚C for 10 hours\u003cstrong\u003e\u003c\/strong\u003ePolyDryer: Level 3 for 18 hours (PolyDryer™)\u003cstrong\u003e\u003c\/strong\u003e(Only if the material has absorbed moisture)\u003cbr\u003eHardening settings: 100˚ for 16 hours","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":50896459038984,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Polymaker-Fiberon_E2_84_A2-PA6-GF25-siv-3.webp?v=1740732288"},{"product_id":"polymaker-panchroma-pla-metallic","title":"Polymaker Panchroma™ PLA Metallic","description":"\u003cp data-start=\"513\" data-end=\"989\"\u003eUnlock the full potential of your 3D models with Panchroma™ PLA Metallic from Polymaker – a filament designed to provide a refined metallic finish and captivating depth. Its composition includes specially selected particles that not only add shine but also maintain the characteristic ease of printing of PLA. Whether you are creating design elements, decorative items, or functional prototypes, this filament will bring elegance and professionalism to every project.\u003c\/p\u003e\n\u003cp data-start=\"991\" data-end=\"1010\"\u003e\u003cstrong data-start=\"991\" data-end=\"1010\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1011\" data-end=\"1360\"\u003e\n\u003cli data-start=\"1011\" data-end=\"1080\"\u003e\n\u003cstrong data-start=\"1013\" data-end=\"1031\"\u003eMetallic Shine\u003c\/strong\u003e: Gives a realistic and luxurious metallic effect.\u003c\/li\u003e\n\u003cli data-start=\"1081\" data-end=\"1179\"\u003e\n\u003cstrong data-start=\"1083\" data-end=\"1108\"\u003eFine shimmering particles\u003c\/strong\u003e: Provide exceptional depth and visual emphasis to every model.\u003c\/li\u003e\n\u003cli data-start=\"1180\" data-end=\"1262\"\u003e\n\u003cstrong data-start=\"1182\" data-end=\"1221\"\u003eHigh-quality and reliable formula\u003c\/strong\u003e: Guarantees stable and durable printing.\u003c\/li\u003e\n\u003cli data-start=\"1263\" data-end=\"1360\"\u003e\n\u003cstrong data-start=\"1265\" data-end=\"1288\"\u003eEasy to print\u003c\/strong\u003e: No risk of clogging with 0.4 mm nozzles, with precise results every time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1367\" data-end=\"1383\"\u003eSPECIFICATION\u003c\/h3\u003e\n\u003cul data-start=\"1385\" data-end=\"1714\"\u003e\n\u003cli data-start=\"1385\" data-end=\"1433\"\u003e\n\u003cstrong data-start=\"1387\" data-end=\"1416\"\u003ePrinting temperature\u003c\/strong\u003e: 190°C – 230°C\u003c\/li\u003e\n\u003cli data-start=\"1434\" data-end=\"1484\"\u003e\n\u003cstrong data-start=\"1436\" data-end=\"1469\"\u003eWorking surface temperature\u003c\/strong\u003e: 25°C – 60°C\u003c\/li\u003e\n\u003cli data-start=\"1485\" data-end=\"1536\"\u003e\n\u003cstrong data-start=\"1487\" data-end=\"1514\"\u003eCamera temperature\u003c\/strong\u003e: Room temperature\u003c\/li\u003e\n\u003cli data-start=\"1537\" data-end=\"1585\"\u003e\n\u003cstrong data-start=\"1539\" data-end=\"1564\"\u003ePrint speed\u003c\/strong\u003e: 40 mm\/s – 60 mm\/s\u003c\/li\u003e\n\u003cli data-start=\"1586\" data-end=\"1622\"\u003e\n\u003cstrong data-start=\"1588\" data-end=\"1611\"\u003eCooling fan\u003c\/strong\u003e: On\u003c\/li\u003e\n\u003cli data-start=\"1623\" data-end=\"1652\"\u003e\n\u003cstrong data-start=\"1625\" data-end=\"1633\"\u003eColor\u003c\/strong\u003e: Gold \/ Metallic\u003c\/li\u003e\n\u003cli data-start=\"1653\" data-end=\"1675\"\u003e\n\u003cstrong data-start=\"1655\" data-end=\"1664\"\u003eWeight\u003c\/strong\u003e: 1000 g\u003c\/li\u003e\n\u003cli data-start=\"1676\" data-end=\"1714\"\u003e\n\u003cstrong data-start=\"1678\" data-end=\"1703\"\u003eFilament Diameter\u003c\/strong\u003e: 1.75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1716\" data-end=\"1877\"\u003e\u003cstrong data-start=\"1716\" data-end=\"1725\"\u003eTip\u003c\/strong\u003e: For optimal adhesion, use a suitable platform or adhesive spray, and allow the printed model to cool before removing it from the bed.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Gold","offer_id":50951660962056,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true},{"title":"Bronze","offer_id":50951660994824,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":50951661027592,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printirane_metallic_gold.webp?v=1741366150"},{"product_id":"panchroma-matte-pla-formerly-polyterra-pla","title":"Panchroma™ Matte PLA (Formerly PolyTerra™ PLA)","description":"\u003cp data-end=\"983\" data-start=\"498\"\u003eDiscover a new level of finesse with Polymaker's Panchroma™ PLA Matte, a high-quality filament with a smooth, matte finish. The specially developed formula guarantees reliable adhesion to the heated platform and excellent detail, while at the same time reducing the glare and defects typical of glossy filaments. With Panchroma™ PLA Matte, you can give a professional, soft finish to a variety of projects, from decorative elements and jewelry to functional prototypes and promotional materials.\u003c\/p\u003e\n\u003cp data-end=\"1004\" data-start=\"985\"\u003e\u003cstrong data-end=\"1004\" data-start=\"985\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1433\" data-start=\"1005\"\u003e\n\u003cli data-end=\"1099\" data-start=\"1005\"\u003e\n\u003cstrong data-end=\"1032\" data-start=\"1007\"\u003eElegant matte effect\u003c\/strong\u003e: Adds a subtle look and depth to any model, without glare.\u003c\/li\u003e\n\u003cli data-end=\"1194\" data-start=\"1100\"\u003e\n\u003cstrong data-end=\"1125\" data-start=\"1102\"\u003eEasy 3D printing\u003c\/strong\u003e: Optimised formula for stable extrusion and minimal settings.\u003c\/li\u003e\n\u003cli data-end=\"1302\" data-start=\"1195\"\u003e\n\u003cstrong data-end=\"1228\" data-start=\"1197\"\u003eStrong and reliable structure\u003c\/strong\u003e: Reduced distortion that preserves the exact dimensions of your projects.\u003c\/li\u003e\n\u003cli data-end=\"1433\" data-start=\"1303\"\u003e\n\u003cstrong data-end=\"1331\" data-start=\"1305\"\u003eUniversal application\u003c\/strong\u003e: Suitable for a variety of 3D print materials and settings, ideal for hobby or professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1456\" data-start=\"1440\"\u003eSPECIFICATION\u003c\/h3\u003e\n\u003cul data-end=\"1816\" data-start=\"1457\"\u003e\n\u003cli data-end=\"1505\" data-start=\"1457\"\u003e\n\u003cstrong data-end=\"1488\" data-start=\"1459\"\u003ePrinting temperature\u003c\/strong\u003e: 190°C – 230°C\u003c\/li\u003e\n\u003cli data-end=\"1556\" data-start=\"1506\"\u003e\n\u003cstrong data-end=\"1541\" data-start=\"1508\"\u003eBuild plate temperature\u003c\/strong\u003e: 25°C – 60°C\u003c\/li\u003e\n\u003cli data-end=\"1608\" data-start=\"1557\"\u003e\n\u003cstrong data-end=\"1586\" data-start=\"1559\"\u003eChamber temperature\u003c\/strong\u003e: Room temperature\u003c\/li\u003e\n\u003cli data-end=\"1657\" data-start=\"1609\"\u003e\n\u003cstrong data-end=\"1636\" data-start=\"1611\"\u003ePrint speed\u003c\/strong\u003e: 40 mm\/s – 60 mm\/s\u003c\/li\u003e\n\u003cli data-end=\"1694\" data-start=\"1658\"\u003e\n\u003cstrong data-end=\"1683\" data-start=\"1660\"\u003eCooling fan\u003c\/strong\u003e: On\u003c\/li\u003e\n\u003cli data-end=\"1754\" data-start=\"1695\"\u003e\n\u003cstrong data-end=\"1705\" data-start=\"1697\"\u003eColour\u003c\/strong\u003e: Various matte shades (subject to availability)\u003c\/li\u003e\n\u003cli data-end=\"1777\" data-start=\"1755\"\u003e\n\u003cstrong data-end=\"1766\" data-start=\"1757\"\u003eWeight\u003c\/strong\u003e: 1000 gr\u003c\/li\u003e\n\u003cli data-end=\"1816\" data-start=\"1778\"\u003e\n\u003cstrong data-end=\"1805\" data-start=\"1780\"\u003eFilament diameter\u003c\/strong\u003e: 1.75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1989\" data-start=\"1818\"\u003e\u003cstrong data-end=\"1827\" data-start=\"1818\"\u003eAdvice\u003c\/strong\u003e: To achieve an optimal matte finish, thoroughly clean the heated bed before printing and allow the filament to cool completely after the process is complete.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Charcoal Black","offer_id":51065389383944,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Cotton White","offer_id":51329183383816,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Lava Red","offer_id":51329183449352,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Army Red","offer_id":53207357260040,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Sky Blue","offer_id":50951717552392,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Lotus Pink","offer_id":50951717585160,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Forest Green","offer_id":51065389318408,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":false},{"title":"Pastel Mint","offer_id":51065389351176,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Ash Grey","offer_id":51065389416712,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Lime Green","offer_id":51065389449480,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Sakura Pink","offer_id":51065389482248,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Savannah Yellow","offer_id":51065389515016,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Wood Brown","offer_id":51065389547784,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Army Dark Green","offer_id":51065389580552,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Arctic Teal","offer_id":51065389613320,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Lavender Purple","offer_id":51329183219976,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Pastel Ice","offer_id":51329183252744,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Pastel Peach","offer_id":51329183285512,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Sunrise Orange","offer_id":51329183351048,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Fossil Grey","offer_id":51329183416584,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Marble White","offer_id":51472548790536,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Sapphire Blue","offer_id":51804062744840,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Army Beige","offer_id":54792653177096,"sku":null,"price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printer-Panchroma_PLA_Matte_Charcoal_Black.webp?v=1769686792"},{"product_id":"polymaker-polymax-pla","title":"PolyMax PLA","description":"\u003cp data-start=\"536\" data-end=\"898\"\u003ePolymaker PolyMax™ PLA is developed with a special focus on reliable and clean 3D printing. The patented Jam-Free™ technology drastically improves heat resistance (softening at around 140°C), minimizing the risk of clogging or print interruption. This allows you to achieve optimal detail and higher working speed without the need for complex settings.\u003c\/p\u003e\n\u003cp data-start=\"900\" data-end=\"936\"\u003e\u003cstrong data-start=\"900\" data-end=\"934\"\u003eWhy choose PolyMax™ PLA?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"937\" data-end=\"1386\"\u003e\n\u003cli data-start=\"937\" data-end=\"1011\"\u003e\n\u003cstrong data-start=\"939\" data-end=\"961\"\u003eHigher strength\u003c\/strong\u003e: 9 times more impact resistant than standard PLA.\u003c\/li\u003e\n\u003cli data-start=\"1012\" data-end=\"1096\"\u003e\n\u003cstrong data-start=\"1014\" data-end=\"1036\"\u003eMore reliable than ABS\u003c\/strong\u003e: With 20% better mechanical properties, without harmful emissions.\u003c\/li\u003e\n\u003cli data-start=\"1097\" data-end=\"1203\"\u003e\n\u003cstrong data-start=\"1099\" data-end=\"1125\"\u003eEasy to 3D print\u003c\/strong\u003e: Suitable for all FFF\/FDM printers; no special upgrades needed.\u003c\/li\u003e\n\u003cli data-start=\"1204\" data-end=\"1290\"\u003e\n\u003cstrong data-start=\"1206\" data-end=\"1233\"\u003eEco-friendly production\u003c\/strong\u003e: Made from sustainable materials, with no toxic emissions.\u003c\/li\u003e\n\u003cli data-start=\"1291\" data-end=\"1386\"\u003e\n\u003cstrong data-start=\"1293\" data-end=\"1322\"\u003eIdeal substitute for ABS\u003c\/strong\u003e: Same or better durability and safe working process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1388\" data-end=\"1416\"\u003e\u003cstrong data-start=\"1388\" data-end=\"1414\"\u003eJam-Free™ Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1417\" data-end=\"1702\"\u003e\n\u003cli data-start=\"1417\" data-end=\"1524\"\u003e\n\u003cstrong data-start=\"1419\" data-end=\"1448\"\u003eIncreased heat resistance\u003c\/strong\u003e: Softening at 140°C, which is 80°C higher than standard PLA filaments.\u003c\/li\u003e\n\u003cli data-start=\"1525\" data-end=\"1614\"\u003e\n\u003cstrong data-start=\"1527\" data-end=\"1549\"\u003eTrouble-free printing\u003c\/strong\u003e: Minimal risk of clogging, even during prolonged sessions.\u003c\/li\u003e\n\u003cli data-start=\"1615\" data-end=\"1702\"\u003e\n\u003cstrong data-start=\"1617\" data-end=\"1646\"\u003eStable performance\u003c\/strong\u003e: Consistent extrusion and precise results every time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1704\" data-end=\"1831\"\u003e\u003cstrong data-start=\"1704\" data-end=\"1713\"\u003eTip\u003c\/strong\u003e: For older or factory models of printers, we recommend a lower printing speed (20–40 mm\/s) for optimal results.\u003c\/p\u003e\n\u003ch3 data-start=\"1838\" data-end=\"1854\"\u003eSPECIFICATION\u003c\/h3\u003e\n\u003cul data-start=\"1855\" data-end=\"2233\"\u003e\n\u003cli data-start=\"1855\" data-end=\"1894\"\u003e\n\u003cstrong data-start=\"1857\" data-end=\"1881\"\u003eBrand (manufacturer)\u003c\/strong\u003e: Polymaker\u003c\/li\u003e\n\u003cli data-start=\"1895\" data-end=\"1934\"\u003e\n\u003cstrong data-start=\"1897\" data-end=\"1912\"\u003eProduct type\u003c\/strong\u003e: PLA \/ PolyMax™ PLA\u003c\/li\u003e\n\u003cli data-start=\"1955\" data-end=\"1976\"\u003e\n\u003cstrong data-start=\"1957\" data-end=\"1966\"\u003eWeight\u003c\/strong\u003e: 750 g\u003c\/li\u003e\n\u003cli data-start=\"1977\" data-end=\"2015\"\u003e\n\u003cstrong data-start=\"1979\" data-end=\"2004\"\u003eFilament Diameter\u003c\/strong\u003e: 1.75 mm\u003c\/li\u003e\n\u003cli data-start=\"2016\" data-end=\"2064\"\u003e\n\u003cstrong data-start=\"2018\" data-end=\"2047\"\u003ePrinting temperature\u003c\/strong\u003e: 190°C – 230°C\u003c\/li\u003e\n\u003cli data-start=\"2065\" data-end=\"2115\"\u003e\n\u003cstrong data-start=\"2067\" data-end=\"2100\"\u003eWorking surface temperature\u003c\/strong\u003e: 25°C – 60°C\u003c\/li\u003e\n\u003cli data-start=\"2116\" data-end=\"2159\"\u003e\n\u003cstrong data-start=\"2118\" data-end=\"2143\"\u003ePrinting speed\u003c\/strong\u003e: 20 – 40 mm\/s\u003c\/li\u003e\n\u003cli data-start=\"2160\" data-end=\"2196\"\u003e\n\u003cstrong data-start=\"2162\" data-end=\"2185\"\u003eCooling fan\u003c\/strong\u003e: On\u003c\/li\u003e\n\u003cli data-start=\"2197\" data-end=\"2233\"\u003e\n\u003cstrong data-start=\"2199\" data-end=\"2215\"\u003eCompatibility\u003c\/strong\u003e: Bambu Lab AMS*\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":50951780401416,"sku":null,"price":43.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament_za_3d_printirane_PolyMax_PLA_Black.webp?v=1741367248"},{"product_id":"panchroma-gradient-matte-pla","title":"Panchroma™ Gradient Matte PLA","description":"\u003cp\u003e\u003cstrong\u003ePanchroma™ Gradient Matte PLA\u003c\/strong\u003e by Polymaker (formerly PolyTerra™ Gradient PLA) is a 1.75 mm PLA filament with smooth pastel colour transitions and a matte surface. The Pastel Rainbow variant creates a gradient effect without filament changes.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Gradient Matte Pastel Rainbow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour cycle:\u003c\/strong\u003e approximately 200 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 190–230°C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 25–60°C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePrinting speed:\u003c\/strong\u003e up to 300 mm\/s\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFan:\u003c\/strong\u003e on\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrying when required:\u003c\/strong\u003e 55°C for 6 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe material works with most standard FDM\/FFF 3D printers. Polymaker recommends a lower speed on older machines.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Pastel Rainbow","offer_id":51602569101576,"sku":"CA04055","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Panchroma-PLA-Matte-pastel-rainbow-filament-za-3d-printer.webp?v=1746781422"},{"product_id":"polymaker-ht-pla-gf-pla-150-filament-3d-printer","title":"Polymaker HT-PLA – PLA filament with resistance up to 150 °C","description":"\u003ch2 data-end=\"351\" data-start=\"307\"\u003eWhat is Polymaker HT‑PLA\u003c\/h2\u003e\r\n\u003cp data-end=\"505\" data-start=\"352\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003ePolymaker HT‑PLA is a high-tech PLA filament specially designed for 3D printing with high thermal conductivity. It provides leading resistance to deformation at temperatures up to 150 °C – significantly higher than standard PLA (~60 °C) \u003c\/span\u003e\u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e. \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThis makes it ideal for functional and technical applications where stability at higher heat is required.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2 data-end=\"550\" data-start=\"507\"\u003eKey Advantages and Features\u003c\/h2\u003e\r\n\u003cul data-start=\"495\" data-end=\"988\"\u003e\r\n\u003cli data-start=\"495\" data-end=\"574\"\u003e\r\n\u003cp data-start=\"497\" data-end=\"574\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"29\" data-is-only-node=\"\"\u003eThermal stability up to 150 °C\u003c\/strong\u003e: Details do not lose shape or structural integrity, even after exposure to heat post-printing \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"575\" data-end=\"654\"\u003e\r\n\u003cp data-start=\"577\" data-end=\"654\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eEasy PLA printing\u003c\/strong\u003e: Uses standard PLA settings – 210–230 °C extruder, 25–60 °C bed, fan on.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"655\" data-end=\"736\"\u003e\r\n\u003cp data-start=\"657\" data-end=\"736\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"26\" data-is-only-node=\"\"\u003eFast printing up to 300 mm\/s\u003c\/strong\u003e: For accelerated production without compromising detail.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"737\" data-end=\"820\"\u003e\r\n\u003cp data-start=\"739\" data-end=\"820\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"20\" data-is-only-node=\"\"\u003eSatin finish\u003c\/strong\u003e: Smooth, professional surface suitable for both visual prototypes and functional parts.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"821\" data-end=\"904\"\u003e\r\n\u003cp data-start=\"823\" data-end=\"904\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eEco-friendly\u003c\/strong\u003e: The base of the material is biodegradable PLA, despite some components that reduce overall biodegradability \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"905\" data-end=\"988\"\u003e\r\n\u003cp data-start=\"907\" data-end=\"988\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"26\" data-is-only-node=\"\"\u003eWide color palette\u003c\/strong\u003e: Available in 14 vibrant and professional colors – black, white, gray, red, green, yellow, and more \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp data-start=\"1041\" data-end=\"1070\"\u003e\u003cstrong data-start=\"1041\" data-end=\"1070\"\u003eRecommended settings:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul data-start=\"1071\" data-end=\"1330\"\u003e\r\n\u003cli data-start=\"1071\" data-end=\"1114\"\u003e\r\n\u003cp data-start=\"1073\" data-end=\"1114\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"29\" data-is-only-node=\"\"\u003eExtruder temperature:\u003c\/strong\u003e 210–230 °C\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1115\" data-end=\"1158\"\u003e\r\n\u003cp data-start=\"1117\" data-end=\"1158\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"24\" data-is-only-node=\"\"\u003eBed temperature:\u003c\/strong\u003e 25–60 °C\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1159\" data-end=\"1202\"\u003e\r\n\u003cp data-start=\"1161\" data-end=\"1202\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"21\" data-is-only-node=\"\"\u003ePrint speed:\u003c\/strong\u003e up to 300 mm\/s\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1203\" data-end=\"1246\"\u003e\r\n\u003cp data-start=\"1205\" data-end=\"1246\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"14\" data-is-only-node=\"\"\u003eRetraction:\u003c\/strong\u003e 1–3 mm at 20–40 mm\/s\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1247\" data-end=\"1330\"\u003e\r\n\u003cp data-start=\"1249\" data-end=\"1330\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"15\" data-is-only-node=\"\"\u003eFan:\u003c\/strong\u003e on—ensures detail quality and cooling.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp data-start=\"1332\" data-end=\"1356\"\u003e\u003cstrong data-start=\"1332\" data-end=\"1356\"\u003eMaterial drying:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul data-start=\"1357\" data-end=\"1438\"\u003e\r\n\u003cli data-start=\"1357\" data-end=\"1438\"\u003e\r\n\u003cp data-start=\"1359\" data-end=\"1438\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eIn high humidity – drying at 60 °C for 6 h will improve quality and prevent bubbles or imperfections.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp data-start=\"1440\" data-end=\"1472\"\u003e\u003cstrong data-start=\"1440\" data-end=\"1472\"\u003eDensity and melt index:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul data-start=\"1473\" data-end=\"1598\"\u003e\r\n\u003cli data-start=\"1473\" data-end=\"1516\"\u003e\r\n\u003cp data-start=\"1475\" data-end=\"1516\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eDensity: ~1.287 g\/cm³\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1517\" data-end=\"1598\"\u003e\r\n\u003cp data-start=\"1519\" data-end=\"1598\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eMelt index: 22.6 g\/10 min (210 °C at 2.16 kg load).\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 data-start=\"1600\" data-end=\"1643\"\u003eAnnealing for maximum durability\u003c\/h2\u003e\r\n\u003cp data-start=\"1645\" data-end=\"1804\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eAlthough HT‑PLA does not have a special HDT additive like the GF version, annealing (30 min at 80–100 °C) increases thermal stability and dimensional accuracy \u003c\/span\u003e\u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e. \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eAfter this process, the material becomes even more resistant at temperatures above the oriented general Tg (~152 °C)\u003c\/span\u003e.\u003c\/p\u003e\r\n\u003ch2 data-start=\"1806\" data-end=\"1835\"\u003eApplications and Use\u003c\/h2\u003e\r\n\u003cp data-start=\"1837\" data-end=\"1876\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003ePolymaker HT‑PLA is a reliable solution for:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul data-start=\"1877\" data-end=\"2093\"\u003e\r\n\u003cli data-start=\"1877\" data-end=\"1920\"\u003e\r\n\u003cp data-start=\"1879\" data-end=\"1920\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"27\" data-is-only-node=\"\"\u003eFunctional components\u003c\/strong\u003e exposed to heat – covers, boxes, handles, and devices.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1921\" data-end=\"1964\"\u003e\r\n\u003cp data-start=\"1923\" data-end=\"1964\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"37\" data-is-only-node=\"\"\u003eHeat-resistant prototypes and models\u003c\/strong\u003e – achieving higher stability in tests.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1965\" data-end=\"2008\"\u003e\r\n\u003cp data-start=\"1967\" data-end=\"2008\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"41\" data-is-only-node=\"\"\u003eIndustrial fittings and assembly parts\u003c\/strong\u003e, where standard PLA loses its shape.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2009\" data-end=\"2093\"\u003e\r\n\u003cp data-start=\"2011\" data-end=\"2093\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"26\" data-is-only-node=\"\"\u003eHobby and cosplay projects\u003c\/strong\u003e that require a beautiful finish and slight heat resistance of around 50–60 °C.\u003c\/span\u003e\u003cbr data-start=\"2050\" data-end=\"2053\"\u003e\u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 data-start=\"2095\" data-end=\"2130\"\u003eComparison with Other Materials\u003c\/h2\u003e\r\n\u003cul data-start=\"2132\" data-end=\"2305\"\u003e\r\n\u003cli data-start=\"2132\" data-end=\"2175\"\u003e\r\n\u003cp data-start=\"2134\" data-end=\"2175\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"18\" data-is-only-node=\"\"\u003eStandard PLA\u003c\/strong\u003e: easy printing, but limits its shape above 60 °C.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2176\" data-end=\"2219\"\u003e\r\n\u003cp data-start=\"2178\" data-end=\"2219\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"13\" data-is-only-node=\"\"\u003eABS \/ ASA\u003c\/strong\u003e: more durable, but require a heated chamber, emit odor, and are difficult to print.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2220\" data-end=\"2263\"\u003e\r\n\u003cp data-start=\"2222\" data-end=\"2263\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"8\" data-is-only-node=\"\"\u003ePETG\u003c\/strong\u003e: stronger than PLA, but not as heat-resistant – reaches around 80 °C.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2264\" data-end=\"2305\"\u003e\r\n\u003cp data-start=\"2266\" data-end=\"2305\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"10\" data-is-only-node=\"\"\u003eHT‑PLA\u003c\/strong\u003e: combines the convenience of PLA with increased stability – an ideal compromise for durable and easy details.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 data-start=\"2307\" data-end=\"2340\"\u003eLimitations and Considerations\u003c\/h2\u003e\r\n\u003cul data-start=\"2342\" data-end=\"2591\"\u003e\r\n\u003cli data-start=\"2342\" data-end=\"2425\"\u003e\r\n\u003cp data-start=\"2344\" data-end=\"2425\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"20\" data-is-only-node=\"\"\u003eLayer adhesion\u003c\/strong\u003e: with very thin walls, adhesion between layers may be weaker \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2426\" data-end=\"2509\"\u003e\r\n\u003cp data-start=\"2428\" data-end=\"2509\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"18\" data-is-only-node=\"\"\u003eUV resistance\u003c\/strong\u003e: not modified for prolonged exposure to sunlight \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"2510\" data-end=\"2591\"\u003e\r\n\u003cp data-start=\"2512\" data-end=\"2591\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"25\" data-is-only-node=\"\"\u003eChemical resistance\u003c\/strong\u003e: good to oils and weak acids, but poor to strong acids and alkaline solutions \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 data-end=\"4377\" data-start=\"4359\"\u003eConclusion\u003c\/h2\u003e\r\n\u003cp data-end=\"4746\" data-start=\"4379\"\u003ePolymaker HT‑PLA‑GF is a premium material for FDM printers – easy to use, durable up to 150 °C, with a stable structure and excellent finish. It is ideal for technical and functional parts where PETG falls short. Despite limitations related to brittleness and layer adhesion strength, after annealing it offers ABS-level thermal resistance, without the complex setup and odors.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"White","offer_id":51669573566728,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":51669573599496,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":51669573632264,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":51669573665032,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":false},{"title":"Grey","offer_id":51669573697800,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":52073667723528,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":52073667756296,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":52073667789064,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":57946797179144,"sku":null,"price":19.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printirane-polymaker-ht-pla-byal.webp?v=1749446178"},{"product_id":"polymaker-ht-pla-gf-staklo-fibri","title":"Polymaker HT-PLA-GF – glass-reinforced PLA up to 150 °C","description":"\u003cp data-start=\"318\" data-end=\"393\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003ePolymaker HT‑PLA‑GF is a PLA-based filament reinforced with glass fiber (~12%) and designed for functional parts with high heat resistance. It withstands up to 150 °C without deformation from its own weight and possesses ABS-like hardness, especially after annealing.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch3 data-start=\"395\" data-end=\"417\"\u003eKey Advantages\u003c\/h3\u003e\r\n\u003cul data-start=\"418\" data-end=\"817\"\u003e\r\n\u003cli data-start=\"418\" data-end=\"495\"\u003e\r\n\u003cp data-start=\"420\" data-end=\"495\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"29\" data-is-only-node=\"\"\u003eThermal Stability up to 150 °C\u003c\/strong\u003e: No deformation from its own weight – ensures stability even at high temperatures \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"496\" data-end=\"573\"\u003e\r\n\u003cp data-start=\"498\" data-end=\"573\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"31\" data-is-only-node=\"\"\u003eReinforced with Glass Fibers\u003c\/strong\u003e (~12%): Increased strength, hardness, and durability – suitable for tools, fixtures, and technical parts.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"574\" data-end=\"653\"\u003e\r\n\u003cp data-start=\"576\" data-end=\"653\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"22\" data-is-only-node=\"\"\u003eFast and Easy Printing\u003c\/strong\u003e: Works with PLA settings – extruder 210–230 °C, bed 25–60 °C, fan on, speed up to 350 mm\/s.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"654\" data-end=\"735\"\u003e\r\n\u003cp data-start=\"656\" data-end=\"735\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"13\" data-is-only-node=\"\"\u003eAnnealing\u003c\/strong\u003e: Recommended 30 min at 80–100 °C (100 °C recommended) – leads to significant improvement in HDT (ABS-like result).\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"736\" data-end=\"817\"\u003e\r\n\u003cp data-start=\"738\" data-end=\"817\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"11\" data-is-only-node=\"\"\u003eColors\u003c\/strong\u003e: 9 “Power Tool” industrial shades – including yellow, red, green, blue, colored for a strong, industrial look \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 data-start=\"819\" data-end=\"860\"\u003eTechnical Specifications and Settings\u003c\/h3\u003e\r\n\u003cul data-start=\"861\" data-end=\"1274\"\u003e\r\n\u003cli data-start=\"861\" data-end=\"942\"\u003e\r\n\u003cp data-start=\"863\" data-end=\"942\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"18\" data-is-only-node=\"\"\u003eDiameter\/Weight\u003c\/strong\u003e: 1.75 mm, 1 kg spool.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"943\" data-end=\"984\"\u003e\r\n\u003cp data-start=\"945\" data-end=\"984\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"24\" data-is-only-node=\"\"\u003ePrinting Temperature\u003c\/strong\u003e: 210–230 °C.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"985\" data-end=\"1026\"\u003e\r\n\u003cp data-start=\"987\" data-end=\"1026\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"13\" data-is-only-node=\"\"\u003ePlatform\u003c\/strong\u003e: 25–60 °C.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1027\" data-end=\"1068\"\u003e\r\n\u003cp data-start=\"1029\" data-end=\"1068\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"11\" data-is-only-node=\"\"\u003eSpeed\u003c\/strong\u003e: up to 350 mm\/s.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1069\" data-end=\"1110\"\u003e\r\n\u003cp data-start=\"1071\" data-end=\"1110\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"14\" data-is-only-node=\"\"\u003eRetraction\u003c\/strong\u003e: 1–3 mm @ 20–40 mm\/s.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1111\" data-end=\"1192\"\u003e\r\n\u003cp data-start=\"1113\" data-end=\"1192\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"10\" data-is-only-node=\"\"\u003eDrying\u003c\/strong\u003e: at 60 °C for 6 h (if moisture has been absorbed).\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1193\" data-end=\"1274\"\u003e\r\n\u003cp data-start=\"1195\" data-end=\"1274\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"8\" data-is-only-node=\"\"\u003eNozzle\u003c\/strong\u003e: hardened steel or ruby – necessary due to the abrasiveness of the glass fiber.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 data-start=\"1276\" data-end=\"1301\"\u003eAnnealing: How and Why\u003c\/h3\u003e\r\n\u003cp data-start=\"1302\" data-end=\"1381\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eAnnealing significantly strengthens HDT, making the material close to ABS in thermal resistance and hardness. Recommended for parts exposed to mechanical and thermal stress.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch3 data-start=\"1383\" data-end=\"1408\"\u003eUsage and Applications\u003c\/h3\u003e\r\n\u003cul data-start=\"1409\" data-end=\"1614\"\u003e\r\n\u003cli data-start=\"1409\" data-end=\"1490\"\u003e\r\n\u003cp data-start=\"1411\" data-end=\"1490\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"24\" data-is-only-node=\"\"\u003eFunctional Details\u003c\/strong\u003e – brackets, fittings, mounting parts, and tools \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1491\" data-end=\"1532\"\u003e\r\n\u003cp data-start=\"1493\" data-end=\"1532\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"29\" data-is-only-node=\"\"\u003eAuto and Electrical Components\u003c\/strong\u003e – resistant to vibrations and temperature.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1533\" data-end=\"1614\"\u003e\r\n\u003cp data-start=\"1535\" data-end=\"1614\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"21\" data-is-only-node=\"\"\u003eOutdoor Applications\u003c\/strong\u003e – good results, but without UV resistance; suitable for household tools \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 data-start=\"1616\" data-end=\"1647\"\u003eComparison with Other Materials\u003c\/h3\u003e\r\n\u003cul data-start=\"1648\" data-end=\"1813\"\u003e\r\n\u003cli data-start=\"1648\" data-end=\"1729\"\u003e\r\n\u003cp data-start=\"1650\" data-end=\"1729\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"18\" data-is-only-node=\"\"\u003eStandard PLA\u003c\/strong\u003e: resistance ~60 °C – HT‑PLA‑GF reaches 150 °C without deformation.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1730\" data-end=\"1771\"\u003e\r\n\u003cp data-start=\"1732\" data-end=\"1771\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"7\" data-is-only-node=\"\"\u003eABS\u003c\/strong\u003e: thermal deformation up to 90°C+ but requires an enclosure and has an odor – HT‑PLA‑GF offers similar resistance, easy printing, and no odors.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1772\" data-end=\"1813\"\u003e\r\n\u003cp data-start=\"1774\" data-end=\"1813\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"27\" data-is-only-node=\"\"\u003ePETG and Other PLA Variants\u003c\/strong\u003e: HT‑PLA‑GF provides higher hardness, suitable for structural applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 data-start=\"1815\" data-end=\"1839\"\u003ePossible Disadvantages\u003c\/h3\u003e\r\n\u003cul data-start=\"1840\" data-end=\"2047\"\u003e\r\n\u003cli data-start=\"1840\" data-end=\"1881\"\u003e\r\n\u003cp data-start=\"1842\" data-end=\"1881\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"23\" data-is-only-node=\"\"\u003eAbrasive to the Nozzle\u003c\/strong\u003e – requires hardened nozzles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1882\" data-end=\"1923\"\u003e\r\n\u003cp data-start=\"1884\" data-end=\"1923\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eWeak UV Protection\u003c\/strong\u003e – not suitable for long-term sun exposure.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1924\" data-end=\"1965\"\u003e\r\n\u003cp data-start=\"1926\" data-end=\"1965\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"26\" data-is-only-node=\"\"\u003eLayer Adhesion\u003c\/strong\u003e – may be limited on thin details.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-start=\"1966\" data-end=\"2047\"\u003e\r\n\u003cp data-start=\"1968\" data-end=\"2047\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"28\" data-is-only-node=\"\"\u003ePartial Biodegradability\u003c\/strong\u003e – PLA matrix remains, but the glass fibers are not biodegradable \u003c\/span\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 data-start=\"2049\" data-end=\"2080\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Polymaker","offers":[{"title":"White","offer_id":51669994602760,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":51669994635528,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printer-polymaker-ht-pla-gf-byal.webp?v=1749451838"},{"product_id":"panchroma-cope-1-75-mm-1-кг","title":"Panchroma CoPE 1.75 mm – 1 kg","description":"\u003cp data-end=\"769\" data-start=\"669\"\u003e\u003cstrong data-end=\"769\" data-start=\"669\"\u003ePanchroma CoPE 1.75 mm – 1 kg: The new generation 3D filament for speed, precision, and quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"983\" data-start=\"771\"\u003eIf you are looking for a 3D printer filament that combines the advantages of PLA with higher efficiency and the ability to print at extremely high speeds – \u003cstrong data-end=\"930\" data-start=\"906\"\u003ePanchroma CoPE\u003c\/strong\u003e from \u003cstrong data-end=\"947\" data-start=\"934\"\u003ePolymaker\u003c\/strong\u003e is exactly what you need.\u003c\/p\u003e\n\u003ch2 data-end=\"1021\" data-start=\"990\"\u003eWhat is Panchroma CoPE?\u003c\/h2\u003e\n\u003cp data-end=\"1462\" data-start=\"1023\"\u003ePanchroma CoPE is a filament based on \u003cstrong data-end=\"1094\" data-start=\"1061\"\u003eco-polyester (CoPE) formula\u003c\/strong\u003e, different from PLA, PETG, or ABS. It is an innovative material developed by Polymaker specifically for high-speed 3D printing, without compromising on quality. CoPE combines exceptional \u003cstrong data-end=\"1305\" data-start=\"1282\"\u003ebed adhesion\u003c\/strong\u003e, \u003cstrong data-end=\"1343\" data-start=\"1307\"\u003eexcellent bridging precision\u003c\/strong\u003e and \u003cstrong data-end=\"1396\" data-start=\"1346\"\u003eability to print at speeds up to 400 mm\/s\u003c\/strong\u003e, placing it in a separate category from traditional materials.\u003c\/p\u003e\n\u003ch2 data-end=\"205\" data-start=\"167\"\u003eKey features of CoPE:\u003c\/h2\u003e\n\u003cp data-end=\"521\" data-start=\"207\"\u003e• \u003cstrong data-end=\"222\" data-start=\"209\"\u003eDiameter:\u003c\/strong\u003e 1.75 mm (±0.03 mm)\u003cbr data-end=\"244\" data-start=\"241\"\u003e• \u003cstrong data-end=\"256\" data-start=\"246\"\u003eWeight:\u003c\/strong\u003e 1000 g (1 kg)\u003cbr data-end=\"273\" data-start=\"270\"\u003e• \u003cstrong data-end=\"301\" data-start=\"275\"\u003eNozzle temperature:\u003c\/strong\u003e 190–230 °C\u003cbr data-end=\"315\" data-start=\"312\"\u003e• \u003cstrong data-is-only-node=\"\" data-end=\"344\" data-start=\"317\"\u003eBed temperature:\u003c\/strong\u003e 25–60 °C\u003cbr data-end=\"356\" data-start=\"353\"\u003e• \u003cstrong data-end=\"372\" data-start=\"358\"\u003eCooling:\u003c\/strong\u003e 100% fan\u003cbr data-end=\"391\" data-start=\"388\"\u003e• \u003cstrong data-end=\"417\" data-start=\"393\"\u003eRecommended speed:\u003c\/strong\u003e up to 400 mm\/s\u003cbr data-end=\"434\" data-start=\"431\"\u003e• \u003cstrong data-end=\"453\" data-start=\"436\"\u003eCompatibility:\u003c\/strong\u003e All FDM\/FFF printers, including AMS systems (like Bambu Lab)\u003c\/p\u003e\n\u003cp data-end=\"599\" data-start=\"523\"\u003e\u003cstrong data-end=\"555\" data-start=\"523\"\u003e🔁 Retraction (Direct Drive):\u003c\/strong\u003e\u003cbr data-end=\"558\" data-start=\"555\"\u003e• Distance: 1 mm\u003cbr data-end=\"579\" data-start=\"576\"\u003e• Speed: 20 mm\/s\u003c\/p\u003e\n\u003cp data-end=\"686\" data-start=\"601\"\u003e\u003cstrong data-end=\"642\" data-start=\"601\"\u003e🔁 Retraction (Bowden\/Indirect Drive):\u003c\/strong\u003e\u003cbr data-end=\"645\" data-start=\"642\"\u003e• Distance: 3 mm\u003cbr data-end=\"666\" data-start=\"663\"\u003e• Speed: 40 mm\/s\u003c\/p\u003e\n\u003cp data-end=\"764\" data-start=\"688\"\u003e\u003cstrong data-end=\"712\" data-start=\"688\"\u003e💨 Drying if needed:\u003c\/strong\u003e\u003cbr data-end=\"715\" data-start=\"712\"\u003e• Temperature: 55˚C\u003cbr data-end=\"737\" data-start=\"734\"\u003e• Duration: 6 hours\u003c\/p\u003e\n\u003ch2 data-end=\"764\" data-start=\"688\"\u003eWhy is Panchroma CoPE special?\u003c\/h2\u003e\n\u003cp data-end=\"2490\" data-start=\"1890\"\u003e\u003cstrong\u003e\u003cspan data-end=\"1931\" data-start=\"1892\"\u003e3D printing\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong data-end=\"1931\" data-start=\"1892\"\u003e like PLA, but much faster:\u003c\/strong\u003e Its formula allows printing at speeds up to 400 mm\/s, without loss of quality.\u003cbr data-end=\"2015\" data-start=\"2012\"\u003e\u003cstrong data-end=\"2051\" data-start=\"2017\"\u003ePhenomenal adhesion to the bed:\u003c\/strong\u003e Even the largest details print without any warping or peeling.\u003cbr data-end=\"2132\" data-start=\"2129\"\u003e\u003cstrong data-end=\"2172\" data-start=\"2134\"\u003eExceptional overhangs and bridges:\u003c\/strong\u003e Save time and material from unnecessary supports – CoPE handles without them.\u003cbr data-end=\"2248\" data-start=\"2245\"\u003e\u003cstrong data-end=\"2282\" data-start=\"2250\"\u003eLow odor and safety:\u003c\/strong\u003e No harmful emissions – ideal for home environments, classrooms, and offices.\u003cbr data-end=\"2354\" data-start=\"2351\"\u003e\u003cstrong data-end=\"2380\" data-start=\"2356\"\u003eFull color range:\u003c\/strong\u003e Part of the Panchroma™ range, this filament is available in multiple colors, all compatible with each other.\u003c\/p\u003e\n\u003ch2 data-end=\"2525\" data-start=\"2497\"\u003eWhat is it suitable for?\u003c\/h2\u003e\n\u003cul data-end=\"2984\" data-start=\"2527\"\u003e\n\u003cli data-end=\"2625\" data-start=\"2527\"\u003e\n\u003cp data-end=\"2625\" data-start=\"2529\"\u003e\u003cstrong data-end=\"2549\" data-start=\"2529\"\u003eRapid prototyping\u003c\/strong\u003e – for design or engineering ideas that require multiple iterations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2716\" data-start=\"2626\"\u003e\n\u003cp data-end=\"2716\" data-start=\"2628\"\u003e\u003cstrong data-end=\"2650\" data-start=\"2628\"\u003eFunctional parts\u003c\/strong\u003e – boxes, stands, organizers, components that do not heat up.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2804\" data-start=\"2717\"\u003e\n\u003cp data-end=\"2804\" data-start=\"2719\"\u003e\u003cstrong data-end=\"2746\" data-start=\"2719\"\u003eArt models\u003c\/strong\u003e – thanks to smooth surfaces and fine detail.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2891\" data-start=\"2805\"\u003e\n\u003cp data-end=\"2891\" data-start=\"2807\"\u003e\u003cstrong data-end=\"2830\" data-start=\"2807\"\u003eMulticolor projects\u003c\/strong\u003e – perfectly compatible with other CoPE colors for AMS systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2984\" data-start=\"2892\"\u003e\n\u003cp data-end=\"2984\" data-start=\"2894\"\u003e\u003cstrong data-end=\"2923\" data-start=\"2894\"\u003eSupport material for PLA\u003c\/strong\u003e – works excellently as breakaway support, without the need for PVA.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"188\" data-start=\"152\"\u003eComparison with other filaments for 3D printers:\u003c\/h2\u003e\n\u003cp data-end=\"221\" data-start=\"190\"\u003e\u003cstrong data-end=\"219\" data-start=\"190\"\u003e📌 Panchroma CoPE vs PLA:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"545\" data-start=\"222\"\u003e\n\u003cli data-end=\"319\" data-start=\"222\"\u003e\n\u003cp data-end=\"319\" data-start=\"224\"\u003eBoth are easy to 3D print, but CoPE allows for much higher speeds (up to 400 mm\/s).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"395\" data-start=\"320\"\u003e\n\u003cp data-end=\"395\" data-start=\"322\"\u003eCoPE has the same high hardness, but better adhesion to the bed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"462\" data-start=\"396\"\u003e\n\u003cp data-end=\"462\" data-start=\"398\"\u003eBoth materials are limited to temperatures up to around 60 °C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"545\" data-start=\"463\"\u003e\n\u003cp data-end=\"545\" data-start=\"465\"\u003ePLA is more affordable, but CoPE offers better detail in overhangs and bridges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"579\" data-start=\"547\"\u003e\u003cstrong data-end=\"577\" data-start=\"547\"\u003e📌 Panchroma CoPE vs PETG:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"795\" data-start=\"580\"\u003e\n\u003cli data-end=\"651\" data-start=\"580\"\u003e\n\u003cp data-end=\"651\" data-start=\"582\"\u003ePETG is more flexible and withstands higher temperatures (up to ~75–80 °C).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"727\" data-start=\"652\"\u003e\n\u003cp data-end=\"727\" data-start=\"654\"\u003eHowever, CoPE prints easier and faster, with fewer strings and defects.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"795\" data-start=\"728\"\u003e\n\u003cp data-end=\"795\" data-start=\"730\"\u003ePETG has better impact resistance, while CoPE is more brittle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"828\" data-start=\"797\"\u003e\u003cstrong data-end=\"826\" data-start=\"797\"\u003e📌 Panchroma CoPE vs ABS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1080\" data-start=\"829\"\u003e\n\u003cli data-end=\"894\" data-start=\"829\"\u003e\n\u003cp data-end=\"894\" data-start=\"831\"\u003eABS has high thermal resistance (~100 °C) and impact resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"988\" data-start=\"895\"\u003e\n\u003cp data-end=\"988\" data-start=\"897\"\u003eCoPE prints much easier – no need for an enclosed chamber or special preparation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1080\" data-start=\"989\"\u003e\n\u003cp data-end=\"1080\" data-start=\"991\"\u003eABS can be processed with acetone, while CoPE is not easily chemically processed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1113\" data-start=\"1082\"\u003e\u003cstrong data-end=\"1111\" data-start=\"1082\"\u003e📌 Panchroma CoPE vs ASA:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1378\" data-start=\"1114\"\u003e\n\u003cli data-end=\"1216\" data-start=\"1114\"\u003e\n\u003cp data-end=\"1216\" data-start=\"1116\"\u003eASA is suitable for outdoor use (UV resistant), while CoPE is more suitable for indoor applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1291\" data-start=\"1217\"\u003e\n\u003cp data-end=\"1291\" data-start=\"1219\"\u003eBoth are rigid, but ASA offers greater outdoor durability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1378\" data-start=\"1292\"\u003e\n\u003cp data-end=\"1378\" data-start=\"1294\"\u003eCoPE has a significantly easier 3D printing process – suitable even for beginners.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-end=\"3041\" data-start=\"2991\"\u003eCoPE combines the ease of PLA with added speed while avoiding the printing difficulties typical of ABS or PETG.\u003c\/h4\u003e\n\u003ch2 data-end=\"3627\" data-start=\"3602\"\u003e Tips for working:\u003c\/h2\u003e\n\u003cul data-end=\"3974\" data-start=\"3629\"\u003e\n\u003cli data-end=\"3739\" data-start=\"3629\"\u003e\n\u003cp data-end=\"3739\" data-start=\"3631\"\u003eUse \u003cstrong data-end=\"3665\" data-start=\"3643\"\u003eMagigoo or glue\u003c\/strong\u003e if printing on a PEI plate to prevent excessive adhesion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3827\" data-start=\"3740\"\u003e\n\u003cp data-end=\"3827\" data-start=\"3742\"\u003e\u003cstrong data-end=\"3770\" data-start=\"3742\"\u003eDo not combine it with PLA\u003c\/strong\u003e in the same object – the materials do not bond well.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3904\" data-start=\"3828\"\u003e\n\u003cp data-end=\"3904\" data-start=\"3830\"\u003e\u003cstrong data-end=\"3869\" data-start=\"3830\"\u003eLet the part cool completely\u003c\/strong\u003e before removing it from the bed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3974\" data-start=\"3905\"\u003e\n\u003cp data-end=\"3974\" data-start=\"3907\"\u003eIf the filament has been left outdoors – \u003cstrong data-end=\"3971\" data-start=\"3943\"\u003edry at 55°C for 6 hours\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":51803765571848,"sku":null,"price":11.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":51803765604616,"sku":null,"price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-za-3d-printer-polymaker-panchroma-cope-black-829149-bg.webp?v=1750684293"},{"product_id":"3d-filament-polymaker-panchroma-pla-basic-350mms","title":"Panchroma™ Basic PLA – PLA filament for 3D printer","description":"\u003ch2\u003ePolymaker Panchroma PLA Basic – high-speed PLA filament for 3D printer\u003c\/h2\u003e\n\u003ch3\u003eWhat is Polymaker Panchroma PLA Basic\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePolymaker Panchroma PLA Basic\u003c\/strong\u003e is a high-speed PLA filament for everyday 3D printing, designed to combine fast production with professional surface quality. The formula is optimized for FDM\/FFF 3D printers and is suitable for both beginners and advanced users who want a reliable material for prototypes, models, decorative elements, and small series of products.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"3D printing settings with filament for 3D printer Panchroma Basic PLA\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/nastroiki-za-3d-printirane-s-polymaker-panchroma-basic-pls_600x600.webp?v=1765293397\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eThe filament is supplied as a standard spool with a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e and a net weight of \u003cstrong\u003e1 kg\u003c\/strong\u003e, making it compatible with the vast majority of desktop and professional 3D printers on the market. The specially developed high-speed formula allows print speeds of up to \u003cstrong\u003e350 mm\/s\u003c\/strong\u003e and a volumetric flow rate of up to \u003cstrong\u003e28 mm³\/s\u003c\/strong\u003e, without sacrificing detail and smoothness of the part.\u003c\/p\u003e\n\u003ch3\u003eTechnology and material quality\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/zdravina-na-pla-filament-za-3d-printer-panchroma-pla-basic_600x600.webp?v=1765293143\" alt=\"Strength of PLA filament for 3D printer Panchroma Basic PLA\" style=\"margin-top: 20px; margin-bottom: 20px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003ePanchroma PLA Basic uses next-generation PLA with improved rheology and mechanical properties. Compared to standard PLA formulations, the material offers significantly greater plasticity – about \u003cstrong\u003e~19% elongation at break\u003c\/strong\u003e versus approximately 6% for typical PLA, as well as nearly double the Charpy impact strength. This means that the details are less brittle and tend to bend before breaking, which is ideal for functional prototypes and parts that are frequently handled.\u003c\/p\u003e\n\u003cp\u003eAccording to the official TDS of Panchroma, the density of PLA Basic (Regular) is about \u003cstrong\u003e1.30 g\/cm³ at 23 °C\u003c\/strong\u003e, and the Vicat softening temperature is approximately \u003cstrong\u003e66 °C\u003c\/strong\u003e. This is typical for high-quality PLA – the material retains its shape under normal room conditions but is not suitable for prolonged use in highly heated environments (for example, in a car cabin during summer).\u003c\/p\u003e\n\u003cp\u003eThe composition is optimized for stable extrusion and good shrinkage, resulting in even layers, clean edges, and minimal defects such as gaps or voids with correct settings. In combination with appropriate cooling, Panchroma PLA Basic performs excellently with bridges and overhangs, characteristic of decorative models and functional geometries.\u003c\/p\u003e\n\u003ch3\u003ePerformance and workflow\u003c\/h3\u003e\n\u003cp\u003eThe main advantage of Panchroma PLA Basic is the high working speed. The manufacturer states that the material supports \u003cstrong\u003eprint speeds up to 350 mm\/s\u003c\/strong\u003e and a volumetric flow rate of up to \u003cstrong\u003e28 mm³\/s\u003c\/strong\u003e on suitable high-speed printers. In practice, this allows for a significant reduction in printing time for large objects and series without losing detail.\u003c\/p\u003e\n\u003cp\u003eThe recommended parameters for extrusion are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 190 – 230 °C (typical start 200 – 215 °C depending on the printer and geometry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeated bed temperature:\u003c\/strong\u003e 25 – 60 °C (often 40 – 50 °C for a good balance between adhesion and easy removal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle diameter:\u003c\/strong\u003e 0.4 mm as standard; smaller\/larger nozzles are possible depending on the purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speeds:\u003c\/strong\u003e 60 – 120 mm\/s for \"reliable\" mode, up to 350 mm\/s for high-speed profiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe material behaves predictably with the ready-made PLA profiles in popular slicers like Bambu Studio, PrusaSlicer, Cura, and OrcaSlicer. In many cases, it is sufficient to use a standard PLA profile and adjust the speed and temperature within the recommended ranges, and for maximum quality and consistency, additional fine calibration (flow, retraction, PA\/pressure advance) is desirable.\u003c\/p\u003e\n\u003cp\u003eFor demanding models with many overhangs and detailed supports, Polymaker recommends using separate support materials such as \u003cstrong\u003ePolySupport™\u003c\/strong\u003e or the soluble \u003cstrong\u003ePolyDissolve™ S1\u003c\/strong\u003e, which provide clean separation of the supports from the PLA detail.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and ecosystem\u003c\/h3\u003e\n\u003cp\u003ePanchroma PLA Basic is a filament with a diameter of \u003cstrong\u003e1.75 mm\u003c\/strong\u003e and is compatible with a wide range of FDM\/FFF printers – from desktop models to larger professional machines. The low working temperature and PLA base mean that a closed chamber or special hardware modifications are not required.\u003c\/p\u003e\n\u003cp\u003eThe filament is marked as compatible with multi-filament systems and AMS solutions (for example, for automatic thread changes), thanks to the stable geometry of the spool and uniform diameter. This makes it a suitable choice for complex projects with multiple materials or for automated production tasks.\u003c\/p\u003e\n\u003cp\u003eRegarding the Panchroma PLA Basic software, it works with all standard formats of 3D models – \u003cstrong\u003eSTL\u003c\/strong\u003e, \u003cstrong\u003e3MF\u003c\/strong\u003e, \u003cstrong\u003eOBJ\u003c\/strong\u003e, etc. It is important that the model is correctly prepared in the slicer: proper wall thickness, layer height (for example, 0.2 mm for a balance between speed and detail), and adequate cooling of the layers is activated.\u003c\/p\u003e\n\u003cp\u003eIf detailed profiles are needed, you can consult the official materials from Polymaker or use ready-made profiles for Panchroma\/PolyLite PLA in your slicer, adapting them to the specific printer if necessary.\u003c\/p\u003e\n\u003ch3\u003eSpool design and ergonomics\u003c\/h3\u003e\n\u003cp\u003ePolymaker uses a well-thought-out spool design for Panchroma PLA Basic. The standard 1 kg spool has a rigid flange and a central hub that spins smoothly on most filament roller holders. The openings on the body facilitate securing the thread at the end of the print, so it does not unwind by itself during storage.\u003c\/p\u003e\n\u003cp\u003eThe label clearly states \u003cstrong\u003ethe type of material (PLA)\u003c\/strong\u003e, \u003cstrong\u003ethe diameter 1.75 mm\u003c\/strong\u003e, \u003cstrong\u003ethe batch number\u003c\/strong\u003e, and the recommended temperatures. This aids in traceability and repeatability for professional use – you can easily reproduce the parameters for a given client or batch.\u003c\/p\u003e\n\u003cp\u003eThe filament is delivered vacuum-sealed with a silica gel packet, which maintains low humidity during transport and initial storage. For optimal performance, especially with longer prints and in more humid environments, it is recommended to store the spool in a box with desiccant or in a filament dryer.\u003c\/p\u003e\n\u003ch3\u003eProfessional use scenarios\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional prototypes and enclosures\u003c\/strong\u003e – thanks to greater toughness and relatively good impact resistance, Panchroma PLA Basic is excellent for electronic enclosures, clips, holders, small mechanical parts, and demo prototypes that need to survive repeated assembly and disassembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailed miniatures and figurines\u003c\/strong\u003e – fine detail, clean surfaces, and minimal layer visibility allow for printing miniatures for board games, collectible figurines, or decorative statuettes, which can then be easily primed and painted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosplay accessories and props\u003c\/strong\u003e – the lightness of the material, combined with improved impact resistance, makes it suitable for helmets, weapons, armor, and other cosplay elements that need to look good and withstand transport and wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducational and STEM projects\u003c\/strong\u003e – the easy setups and good repeatability are ideal for schools, universities, and makerspaces, where educational models, geometric shapes, mechanisms, and other demonstration objects are printed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrototypes for product designers\u003c\/strong\u003e – the fast printing and high quality of the outer surfaces allow for quick validation of shapes, ergonomics, and assemblies before moving on to more expensive technical materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall series of decorative products\u003c\/strong\u003e – thanks to the speed and stable color\/quality consistency, Panchroma PLA Basic is suitable for producing souvenirs, interior decorations, personalized gifts, and other small series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations and best practices\u003c\/h3\u003e\n\u003cp\u003eLike any PLA, Panchroma PLA Basic has its limitations. The softening temperature around 60–66 °C means that the material is not suitable for applications in highly heated environments (e.g., in a car in the sun, near heating elements, or outdoors in direct sunlight at high summer temperatures).\u003c\/p\u003e\n\u003cp\u003eWhen printing on textured PEI beds, some users report strong adhesion. To avoid damaging the surface, it is good practice to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ereduce the bed temperature to around 35–45 °C;\u003c\/li\u003e\n\u003cli\u003euse a release layer (e.g., glue\/tape) if adhesion is excessive;\u003c\/li\u003e\n\u003cli\u003ewait for the bed to cool completely before removing the parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor best results:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore the filament in a dry place; if moisture is absorbed, drying at around \u003cstrong\u003e55 °C for 6 hours\u003c\/strong\u003e in a filament dryer may be necessary;\u003c\/li\u003e\n\u003cli\u003eUse smooth but not excessive acceleration and jerk settings at very high speeds;\u003c\/li\u003e\n\u003cli\u003eAdjust the retraction to minimize strings and specks on the surfaces;\u003c\/li\u003e\n\u003cli\u003eIf maximum strength is needed, increase the temperature in the upper part of the recommended range and reduce the speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe material is PLA-based and is compatible with standard PLA settings by specification. It should not be confused with \u003cstrong\u003ePanchroma CoPE\u003c\/strong\u003e, which is a different material and is not recommended for combined printing with PLA in the same part.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue for Panchroma PLA Basic (Regular)\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePLA-based filament\u003c\/td\u003e\n\u003ctd\u003eSuitable for FDM\/FFF 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003ctd\u003eTolerances according to manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight of the spool\u003c\/td\u003e\n\u003ctd\u003e1000 g\u003c\/td\u003e\n\u003ctd\u003eStandard spool; refill options are available in the series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e190 – 230 °C\u003c\/td\u003e\n\u003ctd\u003eStarting value 200–215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended bed temperature\u003c\/td\u003e\n\u003ctd\u003e25 – 60 °C\u003c\/td\u003e\n\u003ctd\u003eOften 40–50 °C; can be lower with PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended print speed\u003c\/td\u003e\n\u003ctd\u003e60 – 120 mm\/s\u003c\/td\u003e\n\u003ctd\u003eFor high-speed profiles up to 350 mm\/s with a suitable printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum volumetric flow\u003c\/td\u003e\n\u003ctd\u003eup to 28 mm³\/s\u003c\/td\u003e\n\u003ctd\u003eWith well-tuned extrusion and cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity at 23 °C\u003c\/td\u003e\n\u003ctd\u003e~1.30 g\/cm³\u003c\/td\u003e\n\u003ctd\u003eAccording to the official TDS for Regular (Basic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVicat softening temperature\u003c\/td\u003e\n\u003ctd\u003e~66 °C\u003c\/td\u003e\n\u003ctd\u003eMeasured according to ISO 306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical properties (strength, modulus, elongation)\u003c\/td\u003e\n\u003ctd\u003eAvailable data: see TDS for detailed values\u003c\/td\u003e\n\u003ctd\u003ePlasticity ~19% elongation at break, higher impact strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended drying\u003c\/td\u003e\n\u003ctd\u003e55 °C for ~6 hours\u003c\/td\u003e\n\u003ctd\u003eIn a filament dryer or drying cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility with AMS\/multi-material\u003c\/td\u003e\n\u003ctd\u003eYes, for 1.75 mm system\u003c\/td\u003e\n\u003ctd\u003eSuitable for automatic filament changes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":52943195734280,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":52943195767048,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":52943195603208,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":52943195635976,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":52943195668744,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":52943195701512,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":52943195799816,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":52943195832584,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":52943195865352,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/panchroma-pla-basic-black-3d-filament-spool-front.webp?v=1771229256"},{"product_id":"3d-filament-fiberon-pet-gf15-15-stakleni-vlakna","title":"Fiberon PET-GF15 – engineering PET 3D printer filament - 15% glass fibers","description":"\u003ch2\u003eFiberon PET-GF15 – engineering PET 3D filament with 15% glass fibers\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFiberon PET-GF15\u003c\/strong\u003e is a high-performance composite filament for FFF\/FDM 3D printers, based on PET (polyethylene terephthalate), reinforced with about \u003cstrong\u003e15% glass fibers\u003c\/strong\u003e. The material is designed to combine the convenience of \"everyday\" filaments with the mechanical properties of industrial engineering plastics – high stiffness, long-term stability, and excellent resistance to temperature and chemicals.\u003c\/p\u003e\n\u003cp\u003eThanks to the special formula of PET + glass fibers, Fiberon PET-GF15 achieves \u003cstrong\u003ebending strength of about 104 MPa\u003c\/strong\u003e, Young's modulus in XY over 4 GPa, and \u003cstrong\u003eHeat Deflection Temperature (HDT) up to 133.7 °C at 0.45 MPa after annealing\u003c\/strong\u003e. This allows for reliable operation of parts subjected to mechanical and thermal loads – for example, in automotive, industrial, and engineering applications.\u003c\/p\u003e\n\u003cp\u003eThe filament is available in a \u003cstrong\u003e1 kg spool, diameter 1.75 mm\u003c\/strong\u003e and is part of the Fiberon series from Polymaker, which is aimed at professional users and advanced enthusiasts. The packaging is made of recyclable cardboard – a practical solution for manufacturing environments where a lower environmental footprint is also sought.\u003c\/p\u003e\n\u003cp\u003eFiberon PET-GF15 is a logical choice if you are looking for a material for \u003cstrong\u003efunctional prototypes, assembly fixtures, enclosures, and end parts\u003c\/strong\u003e that need to withstand vibrations, higher temperatures, and long-term use. At the same time, it remains relatively easy to work with compared to many other engineering filaments.\u003c\/p\u003e\n\u003ch2\u003eTechnology and material quality\u003c\/h2\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/Fiberon_PET-GF15-images_600x600.jpg?v=1765349820\" alt=\"Fiberon PET-GF15 – engineering PET 3D printer filament - 15% glass fibers\" style=\"margin-top: 10px; margin-bottom: 10px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe core of Fiberon PET-GF15 is the well-known PET, supplemented with 15% short glass fibers. These fibers significantly increase \u003cstrong\u003ethe stiffness and dimensional stability\u003c\/strong\u003e of the parts while limiting shrinkage and deformation during cooling. As a result, the material behaves predictably and allows for tighter tolerances compared to standard PETG or PLA.\u003c\/p\u003e\n\u003cp\u003eAccording to the technical data sheet, the density of the material is about \u003cstrong\u003e1.43 g\/cm³\u003c\/strong\u003e at 23 °C. Mechanical tests on 3D printed samples show:\u003cbr\u003e– \u003cstrong\u003eYoung's modulus XY:\u003c\/strong\u003e ~4.14 GPa;\u003cbr\u003e– \u003cstrong\u003eTensile strength XY:\u003c\/strong\u003e ~59.9 MPa;\u003cbr\u003e– \u003cstrong\u003eTensile strength Z:\u003c\/strong\u003e ~48.2 MPa;\u003cbr\u003e– \u003cstrong\u003eBending strength XY:\u003c\/strong\u003e ~104.2 MPa;\u003cbr\u003e– \u003cstrong\u003eU-notch Charpy impact strength XY:\u003c\/strong\u003e ~8.7 kJ\/m².\u003c\/p\u003e\n\u003cp\u003eEspecially important with this material is good \u003cstrong\u003elayer adhesion\u003c\/strong\u003e. In the Z-direction, Fiberon PET-GF15 reaches about 80 MPa flexural strength, which is significantly better behavior compared to many classic fiber composites, where the Z-layer remains the weak point.\u003c\/p\u003e\n\u003cp\u003eIn terms of moisture absorption, PET-GF15 is far more stable than nylon filaments. The equilibrium water absorption at 70% relative humidity and 23 °C is about \u003cstrong\u003e0,32%\u003c\/strong\u003e, which means less dimensional changes and more predictable behavior during long runs.\u003c\/p\u003e\n\u003ch2\u003ePerformance and workflow\u003c\/h2\u003e\n\u003cp\u003eFiberon PET-GF15 is designed to operate at relatively high temperatures, but with good control over the process. The recommended settings are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 280–310 °C;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 70–80 °C;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber temperature:\u003c\/strong\u003e ambient\/room;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan:\u003c\/strong\u003e off (0%);\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3D printing speed:\u003c\/strong\u003e from ~30 to \u003cstrong\u003e250 mm\/s\u003c\/strong\u003e depending on the printer and geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to the stable PET matrix and selected glass fiber fraction, the material allows for \u003cstrong\u003ehigh speeds\u003c\/strong\u003e, including on more modern CoreXY and AMS systems, without significant degradation of layer quality. For better layer adhesion and strength, it is advisable to work slower in critical areas (overhangs, thin ribs, precise holes).\u003c\/p\u003e\n\u003cp\u003eThe manufacturer recommends \u003cstrong\u003epre-drying at 100 °C for about 10 hours\u003c\/strong\u003e when the filament has been outside a dry box or when \"bubbling\" and micropores are observed in the layer. For maximum thermal resistance and stability after printing, \u003cstrong\u003eannealing at 120 °C for 16 hours\u003c\/strong\u003e can be applied, which raises the HDT to the specified 133.7 °C at 0.45 MPa.\u003c\/p\u003e\n\u003cp\u003eIt is recommended to use \u003cstrong\u003eadhesive for high-temperature materials\u003c\/strong\u003e or a textured PEI surface. PET-GF15 adheres very strongly to such beds; Polymaker explicitly advises that the part should be removed after complete cooling or with the help of a release agent to avoid surface damage.\u003c\/p\u003e\n\u003cp\u003eFor more detailed settings and profiles, you can use the ready-made configurations that \u003ca href=\"https:\/\/wiki.polymaker.com\/polymaker-products\/printer-profiles\/by-material\/pet-petg\/fiberon-tm-pet-gf15#bambu-lab\" rel=\"noopener\" target=\"_blank\"\u003ePolymaker provides through its profile library.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility, ecosystem, and spool design\u003c\/h2\u003e\n\u003cp\u003eFiberon PET-GF15 is compatible with most \u003cstrong\u003eFFF\/FDM 3D printers with 1.75 mm filament\u003c\/strong\u003e, provided they have:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eall-metal hotend\u003c\/strong\u003e, reaching at least 280 °C;\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ehardened steel or ruby nozzle\u003c\/strong\u003e – glass fibers significantly wear out brass nozzles, and according to TDS, their lifespan can drop to about 9 hours of 3D printing;\u003c\/li\u003e\n\u003cli\u003ewell-managed bed heating and, if possible, a closed volume for larger details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe material has been tested by Polymaker for use with \u003cstrong\u003eAMS and other multi-material systems\u003c\/strong\u003e, as the fiber length and its improved \"flexibility\" compared to many CF filaments allow for stable feeding even through longer PTFE paths.\u003c\/p\u003e\n\u003cp\u003eThe spool is made of \u003cstrong\u003ecardboard with precise holes for guiding and securing the filament\u003c\/strong\u003e, which facilitates use in dryers and filament cabinets. The net amount of material is 1 kg, and the additional QR code on the label leads to TDS and profiles for 3D printing – convenient for quick checking of settings directly from the workplace.\u003c\/p\u003e\n\u003cp\u003eFiberon PET-GF15 works excellently with popular slicers like PrusaSlicer, Bambu Studio, OrcaSlicer, and Cura – standard formats such as \u003cstrong\u003eSTL, 3MF, and OBJ\u003c\/strong\u003e are used. For maximum compatibility and repeatability, it is good practice to base your settings on the official profiles and then fine-tune them according to the specific printer.\u003c\/p\u003e\n\u003ch2\u003eProfessional use scenarios\u003c\/h2\u003e\n\u003cp\u003eThanks to the combination of hardness, heat resistance, and low moisture absorption, Fiberon PET-GF15 is suitable for a wide range of engineering applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive clips and housings in the engine compartment\u003c\/strong\u003e – after heating, the parts withstand temperatures above 120 °C and are resistant to oils and many technical fluids. Suitable for cable holders, connectors, mounting brackets, and covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial parts exposed to constant stress\u003c\/strong\u003e – gear covers, sensor holders, mounting blocks, and automation elements, where low deformation and stable dimensions are critical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJigs and fixtures\u003c\/strong\u003e – mounting, calibration, and inspection devices that must remain geometrically stable under load and with repeated use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosures and boxes for electronics\u003c\/strong\u003e – the PET base provides good chemical resistance and a higher working temperature compared to standard PLA, and the surface has a pleasant matte finish that hides the layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional prototypes and small series of end products\u003c\/strong\u003e – consoles, handles, quick adapters, elements for drones and robots, where the balance between weight, strength, and easy reprinting in 3D is valued.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter annealing, the dimensional change is below 0.5 %, allowing for the design of parts with precise fits, e.g. hinge joints, sliding guides, and components that attract to metal elements.\u003c\/p\u003e\n\u003ch2\u003eLimitations and best practices\u003c\/h2\u003e\n\u003cp\u003eAlthough PET-GF15 is relatively easy to print composite filament, there are several important features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle wear:\u003c\/strong\u003e glass fibers are highly abrasive. The manufacturer recommends mandatory use of hardened or ruby nozzles; with a brass nozzle, the lifespan may be only a few hours of printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature requirements:\u003c\/strong\u003e if your printer only reaches 280–285 °C, the material can be printed, but it is advisable to reduce the speed and monitor layer adhesion, especially for thick parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture:\u003c\/strong\u003e the material should be stored in a dry environment (below 20% RH) and preferably in a filament dryer. In case of \"cracking\" and white spots in the layer – dry the filament according to TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnealing:\u003c\/strong\u003e perform it on a flat surface, preferably together with the base and with supports preserved for parts with bridges and overhangs to avoid warping. Expect slight color lightening – this is not a defect, but a result of a change in the material's crystallinity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed adhesion:\u003c\/strong\u003e PET-GF15 adheres strongly to a clean textured PEI surface. Allow the bed to cool completely or use a thin layer of adhesive\/release agent to protect the coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is recommended to create a calibration model to confirm dimensions before serial printing, especially if you plan subsequent annealing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications and sources\u003c\/h2\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePET with 15% glass fibers\u003c\/td\u003e\n\u003ctd\u003eFiberon series composite filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003ctd\u003eTolerance according to manufacturer data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003ctd\u003eCardboard spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.43 g\/cm³\u003c\/td\u003e\n\u003ctd\u003e23 °C, ISO 1183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e280–310 °C\u003c\/td\u003e\n\u003ctd\u003eAll-metal hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e70–80 °C\u003c\/td\u003e\n\u003ctd\u003eTextured PEI or adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003eup to 250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eDepending on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT @ 0.45 MPa (printed)\u003c\/td\u003e\n\u003ctd\u003e≈81.6 °C\u003c\/td\u003e\n\u003ctd\u003eISO 75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDT @ 0.45 MPa (after annealing)\u003c\/td\u003e\n\u003ctd\u003e≈133.7 °C\u003c\/td\u003e\n\u003ctd\u003e120 °C, 16 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength XY\u003c\/td\u003e\n\u003ctd\u003e≈59.9 MPa\u003c\/td\u003e\n\u003ctd\u003eISO 527, printed sample\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoung's modulus XY\u003c\/td\u003e\n\u003ctd\u003e≈4.14 GPa\u003c\/td\u003e\n\u003ctd\u003eISO 527\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending strength XY\u003c\/td\u003e\n\u003ctd\u003e≈104.2 MPa\u003c\/td\u003e\n\u003ctd\u003eISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquilibrium water absorption\u003c\/td\u003e\n\u003ctd\u003e≈0.32 %\u003c\/td\u003e\n\u003ctd\u003e70% RH, 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLinks to tables and charts for download\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFiberon Material Comparison Guide – comparison tables and charts with other Fiberon filaments: https:\/\/fiberon.polymaker.com\/material-comparison\/\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":52946290082056,"sku":null,"price":25.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":52946290114824,"sku":null,"price":29.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/polymaker-fiberon-pet-gf15-black-175-mm-1000-g-1179775-bg.webp?v=1765349938"},{"product_id":"3d-filament-panchroma-matte-basic-pla-paket-4-1","title":"Panchroma Basic PLA – 5-Spool Filament Bundle","description":"\u003ch2\u003ePanchroma Basic PLA – 5-Spool Filament Bundle\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePanchroma Basic PLA 5-spool bundle\u003c\/strong\u003e lets you select a total of five spools from the available Panchroma Basic PLA colours. Each spool contains \u003cstrong\u003e1 kg of 1.75 mm PLA filament\u003c\/strong\u003e, giving you 5 kg of material in one order.\u003c\/p\u003e\n\u003cp\u003eIt is a practical choice for studios, offices, teaching labs, print farms and anyone who wants to stock several colours of reliable PLA for everyday projects.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImportant:\u003c\/em\u003e this is a standalone bundle product and \u003cstrong\u003ecannot be combined with other discounts or coupons\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Panchroma Basic PLA\u003c\/h2\u003e\n\u003cp\u003ePolymaker Panchroma Basic PLA uses a next-generation PLA formula developed for fast, reliable and precise 3D printing. It prints easily, has low warping and works with most standard FDM\/FFF 3D printers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-speed printing:\u003c\/strong\u003e up to 350 mm\/s and up to 28 mm³\/s volumetric flow with a suitable printer, profile and cooling;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy to print:\u003c\/strong\u003e standard PLA settings, cooling fan on and no enclosure required;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReliable feeding:\u003c\/strong\u003e suitable for Bambu AMS and other multicolour or multi-material systems;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFlexible colour choice:\u003c\/strong\u003e combine five spools from the available Basic PLA colours in one bundle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cp\u003ePanchroma Basic PLA is suitable for prototypes, models, miniatures, decorative prints, cosplay props, educational projects and general everyday 3D printing. For heavily loaded parts or components exposed to high temperatures, choose a material with suitable mechanical and thermal resistance.\u003c\/p\u003e\n\u003ch2\u003eRecommended print settings\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003cth\u003eParameter\u003c\/th\u003e\u003cth\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003ePLA filament\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eDiameter\u003c\/td\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNet weight\u003c\/td\u003e\u003ctd\u003e5 × 1 kg\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNozzle temperature\u003c\/td\u003e\u003ctd\u003e190–230 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eBed temperature\u003c\/td\u003e\u003ctd\u003e25–60 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCooling\u003c\/td\u003e\u003ctd\u003eFan: on\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePrint speed\u003c\/td\u003e\u003ctd\u003eUp to 350 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eMaximum volumetric flow\u003c\/td\u003e\u003ctd\u003eUp to 28 mm³\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eDirect-drive retraction\u003c\/td\u003e\u003ctd\u003e1 mm at 20 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eBowden retraction\u003c\/td\u003e\u003ctd\u003e3 mm at 40 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eDrying after moisture absorption\u003c\/td\u003e\u003ctd\u003e55 °C for 6 hours\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility and storage\u003c\/h2\u003e\n\u003cp\u003eUse a standard PLA profile in Bambu Studio, OrcaSlicer, PrusaSlicer, Cura or other software compatible with your printer, then tune the temperature and speed for the model. High-speed printing requires a suitable hotend, stable volumetric flow and effective cooling.\u003c\/p\u003e\n\u003cp\u003eStore the spools in a cool, dry place away from direct sunlight. If the filament has absorbed moisture, dry it at 55 °C for approximately 6 hours before printing.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":52946483085576,"sku":null,"price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/3d-filament-panchroma-matte-basic-pla-paket-budnel-5-broya3.webp?v=1786455809"},{"product_id":"filament-panchroma-translucent-natural-175-mm","title":"Polymaker Panchroma Translucent PLA – Various Colours","description":"\u003cp\u003ePanchroma Translucent is a PLA-based 3D printing filament designed for projects where light transmission and visual impact are an essential part of the end result. The range includes Natural, Cyan, Magenta, Yellow and Grey; select the colour from the product options. It is suitable for users who want to make decorative details, lampshades, diffusers, artistic models and visual prototypes without moving to a complex or capricious workflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA filament with a diameter of 1.75 mm\u003c\/strong\u003e and net weight \u003cstrong\u003e1 kg\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDeveloped for \u003cstrong\u003etranslucent effect\u003c\/strong\u003e, which is most pronounced in thin-walled and single-walled models.\u003c\/li\u003e\n\u003cli\u003eOperating settings: \u003cstrong\u003e190–230°C\u003c\/strong\u003e nozzle temperature and \u003cstrong\u003e25–60°C\u003c\/strong\u003e bed temperature.\u003c\/li\u003e\n\u003cli\u003eSupports \u003cstrong\u003eprint speed up to 200 mm\/s\u003c\/strong\u003e with cooling on.\u003c\/li\u003e\n\u003cli\u003eSuitable for standard desktop 3D printers working with PLA profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat is Panchroma Translucent?\u003c\/h2\u003e\n\u003cp\u003ePanchroma Translucent is a PLA 3D printing filament aimed at projects with light transmission. Its main idea is not to imitate a completely transparent material, but to give a controlled translucent result that looks best with properly designed walls, volume and lighting. This makes it particularly useful for models that need to look good not only in form but also in material presence.\u003c\/p\u003e\n\u003cp\u003eThis means something important: If your goal is a good visual effect, softer light scattering and more interesting behavior of the model under illumination, Panchroma Translucent is a logical choice. It allows a more pronounced decorative result to be achieved without requiring a special class of machine or complex settings beyond the typical PLA working range.\u003c\/p\u003e\n\u003ch2\u003eTechnology and material quality\u003c\/h2\u003e\n\u003cp\u003eThe quality of this type of filament is not only determined by whether it feeds evenly. The way the material scatters light in the finished model is also important here. In Panchroma Translucent, this effect is strongest in thin-wall and single-wall geometries. In practice, this means that when the model is designed with thin walls or with controlled thickness, the result is clearer, more uniform and more predictable.\u003c\/p\u003e\n\u003cp\u003eThis is important for anyone making lighting fixtures, decorative panels, LED covers, visual mockups, or art objects. In such applications, the filament must not simply retain its shape. It should work well both as a surface and as a carrier of light. This is where Panchroma differs from standard opaque PLA materials. With a good model and correct settings, it allows for less visual weight and a softer light picture.\u003c\/p\u003e\n\u003cp\u003eAn additional advantage is that the material remains within the familiar logic of PLA. This makes it easier for both advanced users and people who already have an established PLA workflow and don't want to abruptly change profiles, temperature ranges, and material behavior.\u003c\/p\u003e\n\u003ch2\u003eProductivity and workflow\u003c\/h2\u003e\n\u003cp\u003eOperating settings for Panchroma Translucent are nozzle temperature \u003cstrong\u003e190–230°C\u003c\/strong\u003e, bed temperature \u003cstrong\u003e25–60°C\u003c\/strong\u003e, cooling enabled and print speed up to \u003cstrong\u003e200 mm\/s\u003c\/strong\u003e. This gives a wide enough range to adjust according to the specific printer, hotend, airflow and model geometry.\u003c\/p\u003e\n\u003cp\u003eIn practice, a good startup approach is simple. You use a standard PLA profile, start in the middle of the temperature range and adjust accordingly. If you are looking for a cleaner detail and stable light transmission, it makes sense to carefully approach the thickness of the walls, the height of the layer and the number of perimeters. In this material, form and settings work together. If the design is too dense, the translucent effect naturally weakens.\u003c\/p\u003e\n\u003cp\u003eRetraction settings are \u003cstrong\u003e1 mm at 20 mm\/s\u003c\/strong\u003e for direct drive and \u003cstrong\u003e3 mm at 40 mm\/s\u003c\/strong\u003e for indirect feed systems, the generalized range being \u003cstrong\u003e1–3 mm\u003c\/strong\u003e and \u003cstrong\u003e20–40 mm\/s\u003c\/strong\u003e. This is useful because it gives a real basis to start from instead of the user starting with random values. If the machine is older or not optimised for high speeds, a better approach is to start more conservatively and then increase gradually.\u003c\/p\u003e\n\u003cp\u003eIn the presence of moisture, drying at \u003cstrong\u003e55°C for 6 hours\u003c\/strong\u003e. This is good practice, especially if you notice erratic feed, a rougher surface, or unwanted surface artefacts. Dry storage remains an important part of the predictable behavior of any PLA filament, including this variant.\u003c\/p\u003e\n\u003ch2\u003eCompatibility and everyday use\u003c\/h2\u003e\n\u003cp\u003ePanchroma Translucent is designed for standard desktop FFF\/FDM 3D printers. The material does not require a special enclosure or unusual hardware, making it easy to integrate into an existing workflow. If you already use PLA, switching to this filament is relatively easy and does not involve a complete change in the way you work.\u003c\/p\u003e\n\u003cp\u003eAMS compatibility. This is useful for users who work with automated feeding and want a more convenient operation when changing materials or on longer jobs. Supporting materials \u003cstrong\u003ePolySupport\u003c\/strong\u003e and \u003cstrong\u003ePolyDissolve S1\u003c\/strong\u003e, which is important for projects with more complex geometry.\u003c\/p\u003e\n\u003cp\u003eIn everyday use, the most important parameters are clear: diameter \u003cstrong\u003e1.75 mm\u003c\/strong\u003e, net weight \u003cstrong\u003e1 kg\u003c\/strong\u003e and PLA based workflow. This is a practical combination because it makes it easy to plan consumption, change spools and use pre-existing profiles.\u003c\/p\u003e\n\u003ch2\u003eDesign, ergonomics and visual result\u003c\/h2\u003e\n\u003cp\u003eWith 3D printing filaments, the design of the spool itself is usually not the main point of purchase, but day-to-day operation is affected by how predictably the material is fed. The Panchroma series features hardened spool edges to aid in more stable motion in automatic feed systems. It's a small but practical detail that can make a difference in long-term use.\u003c\/p\u003e\n\u003cp\u003eThe true value of the model remains in the visual output. The Natural option is suitable when you are not looking for an aggressive colour, but a more neutral base to emphasize the light transmission itself. This makes it suitable for lampshades, illuminated logos, art installations, decorative elements and conceptual models, where the material needs to contribute to the vision rather than just carry form.\u003c\/p\u003e\n\n\u003ch2\u003eProfessional use cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLampshades and light diffusers\u003c\/strong\u003e – softer and more uniform dispersion of light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecorative patterns\u003c\/strong\u003e – greater visual depth compared to standard opaque PLA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual prototypes\u003c\/strong\u003e – better pre-estimation of details that will be visible with backlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtistic objects and props\u003c\/strong\u003e – more interesting material effect without complex post-processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducational demonstrations\u003c\/strong\u003e – clearly shows how wall thickness affects light transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShowcase and presentation models\u003c\/strong\u003e – a more measured and aesthetic lighting result.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn all these cases, the strength of Panchroma Translucent is that it combines a familiar PLA workflow with a more specific visual purpose. This saves setup time and allows a faster transition from idea to finished model.\u003c\/p\u003e\n\u003ch2\u003eLimitations and good practices\u003c\/h2\u003e\n\u003cp\u003eThe most important limitation is not to expect a completely transparent result. This is a translucent material, not a substitute for optically clear plastic. The effect depends strongly on the geometry, wall thickness, internal structure and lighting. If the model is massive and thick-walled, the end result will be significantly denser visually.\u003c\/p\u003e\n\u003cp\u003eIt is a good practice to think about light even when designing. Instead of relying only on the material, the thickness of the model should be controlled and an appropriate structure should be selected. If a cleaner visual effect is needed, it makes sense to do short tests with different wall thicknesses before making the final detail.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial type\u003c\/td\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePanchroma Translucent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour variant\u003c\/td\u003e\n\u003ctd\u003eSelected colour: Natural, Cyan, Magenta, Yellow or Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e190–230°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e25–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eEnabled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003eUp to 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetraction distance\u003c\/td\u003e\n\u003ctd\u003e1–3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetraction speed\u003c\/td\u003e\n\u003ctd\u003e20–40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e55°C for 6 hours with absorbed moisture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupporting materials\u003c\/td\u003e\n\u003ctd\u003ePolySupport, PolyDissolve S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAMS compatibility\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNatural variant product code\u003c\/td\u003e\n\u003ctd\u003eCA02037\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.17 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVicat softening temperature\u003c\/td\u003e\n\u003ctd\u003e63°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY tensile strength\u003c\/td\u003e\n\u003ctd\u003e52.3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharpy impact XY notched\u003c\/td\u003e\n\u003ctd\u003e3.3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Translucent Natural","offer_id":58317505462536,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Тranslucent Cyan","offer_id":58317505495304,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Translucent Magenta","offer_id":58317505528072,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Translucent Yellow","offer_id":58317505560840,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Translucent Grey","offer_id":58317505593608,"sku":null,"price":23.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-panchroma-translucent-natural-hero.webp?v=1775214229"},{"product_id":"2x-polyflex-tpu95-orange-white-bundle","title":"PolyFlex™ TPU95 Orange + White – Two 750 g Spools","description":"\u003cp\u003eThis PolyFlex™ TPU95 bundle combines one orange and one white spool of flexible 1.75 mm TPU. With a Shore 95A hardness, the material balances flexibility, impact resistance and practical printability for functional parts that need to bend, absorb vibration or recover after deformation.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × PolyFlex™ TPU95 Orange, 1.75 mm, 750 g\u003c\/li\u003e\n  \u003cli\u003e1 × PolyFlex™ TPU95 White, 1.75 mm, 750 g\u003c\/li\u003e\n  \u003cli\u003eTotal filament weight: 1.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy choose this TPU bundle?\u003c\/h2\u003e\n\u003cp\u003eThe orange and white combination is useful for colour-coded prototypes, protective components and parts that need clear visual separation. PolyFlex™ TPU95 is firmer and generally easier to handle than very soft TPU grades, while remaining flexible enough for grips, cases, seals, protective covers, wheels and vibration-damping components.\u003c\/p\u003e\n\n\u003cp\u003eThe filament is compatible with FDM 3D printers that use 1.75 mm material. A direct-drive extruder is recommended for the most controlled filament path, although a carefully tuned Bowden setup may also work. Actual results depend on the printer, extruder, nozzle, part geometry and condition of the filament.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended starting settings\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\u003ctd\u003eFlexible TPU, Shore 95A\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003eFilament diameter\u003c\/th\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003eNozzle temperature\u003c\/th\u003e\u003ctd\u003e210–230°C\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003eBuild-plate temperature\u003c\/th\u003e\u003ctd\u003e25–60°C\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003ePrint speed\u003c\/th\u003e\u003ctd\u003e20–40 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003ePart cooling\u003c\/th\u003e\u003ctd\u003eOn\u003c\/td\u003e\u003c\/tr\u003e\n    \u003ctr\u003e\u003cth scope=\"row\"\u003eDrying when moisture has been absorbed\u003c\/th\u003e\u003ctd\u003e70°C for 8 hours\u003c\/td\u003e\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eFor reliable extrusion, start at the lower end of the speed range, use minimal retraction and keep the filament path as constrained as possible. If you see stringing, popping or an uneven surface, dry the filament before changing several slicer settings at once.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProtective cases, bumpers and covers\u003c\/li\u003e\n  \u003cli\u003eFlexible grips, handles and ergonomic components\u003c\/li\u003e\n  \u003cli\u003eSeals, feet and vibration-damping parts\u003c\/li\u003e\n  \u003cli\u003eWheels, rollers and impact-resistant prototypes\u003c\/li\u003e\n  \u003cli\u003eColour-coded workshop or educational components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":57866869113096,"sku":null,"price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/2x-polyflex-tpu95-orange-white-bundle.webp?v=1779381675"},{"product_id":"filament-polymaker-ht-pla-pro-300-mm-s","title":"Polymaker HT-PLA Pro – 1.75 mm, 1 kg PLA Filament","description":"\u003cp\u003e\u003cstrong\u003ePolymaker HT-PLA Pro\u003c\/strong\u003e is a tough PLA filament for functional prototypes, housings, brackets, jigs and fixtures. It combines the familiar PLA printing workflow with improved impact strength and layer bonding compared with Polymaker HT-PLA. Choose \u003cstrong\u003eBlack or Grey, 1.75 mm, 1 kg\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eAround twice the notched impact strength of HT-PLA: 9.94 versus 4.94 kJ\/m² in X–Y.\u003c\/li\u003e\u003cli\u003eStronger layer bonding, with Z-axis tensile strength of 26.8 MPa.\u003c\/li\u003e\u003cli\u003e3D printing speeds up to 300 mm\/s with suitable hardware and settings.\u003c\/li\u003e\u003cli\u003eA standard brass nozzle is sufficient; no enclosure is required.\u003c\/li\u003e\u003cli\u003eFinished parts can be annealed to improve heat resistance under load.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eHT-PLA Pro vs HT-PLA\u003c\/h2\u003e\n\u003cp\u003ePro offers higher impact strength and improved strength between layers. This is useful for parts that are assembled, handled frequently or exposed to impacts. Compare it with \u003ca href=\"https:\/\/3dlarge.com\/en\/products\/polymaker-ht-pla-pla-filament-with-resistance-up-to-150-degree-c\"\u003ePolymaker HT-PLA\u003c\/a\u003e for your application.\u003c\/p\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth scope=\"col\"\u003eProperty\u003c\/th\u003e\u003cth scope=\"col\"\u003eHT-PLA Pro\u003c\/th\u003e\u003cth scope=\"col\"\u003eHT-PLA\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eNotched Charpy, X–Y\u003c\/td\u003e\u003ctd\u003e9.94 kJ\/m²\u003c\/td\u003e\u003ctd\u003e4.94 kJ\/m²\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eTensile strength, Z\u003c\/td\u003e\u003ctd\u003e26.8 MPa\u003c\/td\u003e\u003ctd\u003e20.8 MPa\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThese are typical laboratory values. Part orientation, geometry, walls, infill and print settings affect the strength of the finished part.\u003c\/p\u003e\n\u003ch2\u003eHeat resistance: Vicat and HDT\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA Vicat softening temperature of 148.3°C does not mean a loaded part can operate continuously at that temperature.\u003c\/strong\u003e For parts exposed to both heat and mechanical load, use HDT — the heat deflection temperature at a specified load — as the more relevant reference.\u003c\/p\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth scope=\"col\"\u003eThermal property\u003c\/th\u003e\u003cth scope=\"col\"\u003eAs printed\u003c\/th\u003e\u003cth scope=\"col\"\u003eAfter annealing\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eVicat softening temperature\u003c\/td\u003e\u003ctd\u003e148.3°C\u003c\/td\u003e\u003ctd\u003e150.5°C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eHDT at 0.45 MPa\u003c\/td\u003e\u003ctd\u003e56.3°C\u003c\/td\u003e\u003ctd\u003e107.6°C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eHDT at 1.8 MPa\u003c\/td\u003e\u003ctd\u003e53.8°C\u003c\/td\u003e\u003ctd\u003e68.6°C\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eAnneal at 100°C. Allow 30–60 minutes for walls under 4 mm, 1–2 hours at 6 mm, 2–4 hours at 8 mm and 3–6 hours at 10 mm. Use uniform heating, let the part cool inside the chamber and check its dimensions. Expected dimensional change is around 0.3–0.6%, so test a sample first for assemblies with tight tolerances.\u003c\/p\u003e\n\u003ch2\u003e3D printing settings\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth scope=\"col\"\u003eSetting\u003c\/th\u003e\u003cth scope=\"col\"\u003eRecommendation\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eNozzle\u003c\/td\u003e\u003ctd\u003e230°C; working range 210–230°C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eBed\u003c\/td\u003e\u003ctd\u003e25–65°C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eBuild surface\u003c\/td\u003e\u003ctd\u003ePC or textured PEI\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eSpeed\u003c\/td\u003e\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCooling fan\u003c\/td\u003e\u003ctd\u003eOn\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eEnclosure\u003c\/td\u003e\u003ctd\u003eNot required\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eDirect-drive retraction\u003c\/td\u003e\u003ctd\u003e1–3 mm at 20–40 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eDrying if moisture is absorbed\u003c\/td\u003e\u003ctd\u003e60°C for 6 hours\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eStart with a proven PLA profile and a short temperature, flow and layer-bonding test. Match the speed to your hotend flow and required finish. At 230°C the surface is semi-gloss. Around 210°C it becomes more matte, but strength may decrease.\u003c\/p\u003e\n\u003ch2\u003eSuitable applications\u003c\/h2\u003e\n\u003cp\u003eHT-PLA Pro is a practical choice for functional prototypes, brackets, clips, housings and workshop fixtures. For parts near a heat source, check the actual load and temperature against HDT. UV resistance is similar to ordinary PLA; ASA may be a better choice for prolonged exposure to direct sunlight.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications and storage\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003ePLA\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eDiameter\u003c\/td\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eNet filament weight\u003c\/td\u003e\u003ctd\u003e1 kg\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eColours\u003c\/td\u003e\u003ctd\u003eBlack and Grey\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eDensity\u003c\/td\u003e\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eTensile strength, X–Y \/ Z\u003c\/td\u003e\u003ctd\u003e37.6 \/ 26.8 MPa\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eNotched Charpy, X–Y\u003c\/td\u003e\u003ctd\u003e9.94 kJ\/m²\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eKeep the spool in a sealed dry box with desiccant. If needed, dry at 60°C for 6 hours. Explore the other \u003ca href=\"https:\/\/3dlarge.com\/en\/collections\/pla-filament\"\u003ePLA filaments for 3D printing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/TDS_Polymaker_HT-PLA_Pro_V1.4_2026-7-17_EN.pdf?v=1791295763\"\u003ePolymaker HT-PLA Pro technical data sheet — PDF (EN)\u003c\/a\u003e\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Black","offer_id":59008838467848,"sku":"PA20001","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":59008838500616,"sku":"PA20003","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3318\/5032\/files\/filament-polymaker-ht-pla-pro-cheren-izometrichen-pogled.webp?v=1791295545"}],"url":"https:\/\/3dlarge.com\/en\/collections\/polymaker.oembed","provider":"3DLarge","version":"1.0","type":"link"}